LPI2C: Low Power I2C Driver

Overview

Modules
	LPI2C FreeRTOS Driver
	LPI2C Master DMA Driver
	LPI2C Master Driver
	LPI2C Slave DMA Driver
	LPI2C Slave Driver
	LPI2C µCOS/II Driver
	LPI2C µCOS/III Driver

Files
file	fsl_lpi2c.h

Enumerations
enum	_lpi2c_status {   kStatus_LPI2C_Busy = MAKE_STATUS(kStatusGroup_LPI2C, 0),   kStatus_LPI2C_Idle = MAKE_STATUS(kStatusGroup_LPI2C, 1),   kStatus_LPI2C_Nak = MAKE_STATUS(kStatusGroup_LPI2C, 2),   kStatus_LPI2C_FifoError = MAKE_STATUS(kStatusGroup_LPI2C, 3),   kStatus_LPI2C_BitError = MAKE_STATUS(kStatusGroup_LPI2C, 4),   kStatus_LPI2C_ArbitrationLost = MAKE_STATUS(kStatusGroup_LPI2C, 5),   kStatus_LPI2C_PinLowTimeout,   kStatus_LPI2C_NoTransferInProgress,   kStatus_LPI2C_DmaRequestFail = MAKE_STATUS(kStatusGroup_LPI2C, 7) }
	LPI2C status return codes. More...

Driver version
#define	FSL_LPI2C_DRIVER_VERSION   (MAKE_VERSION(2, 1, 0))
	LPI2C driver version 2.1.0. More...

Macro Definition Documentation

#define FSL_LPI2C_DRIVER_VERSION   (MAKE_VERSION(2, 1, 0))

Enumeration Type Documentation

enum _lpi2c_status

Enumerator
kStatus_LPI2C_Busy	The master is already performing a transfer.
kStatus_LPI2C_Idle	The slave driver is idle.
kStatus_LPI2C_Nak	The slave device sent a NAK in response to a byte.
kStatus_LPI2C_FifoError	FIFO under run or overrun.
kStatus_LPI2C_BitError	Transferred bit was not seen on the bus.
kStatus_LPI2C_ArbitrationLost	Arbitration lost error.
kStatus_LPI2C_PinLowTimeout	SCL or SDA were held low longer than the timeout.
kStatus_LPI2C_NoTransferInProgress	Attempt to abort a transfer when one is not in progress.
kStatus_LPI2C_DmaRequestFail	DMA request failed.