RCM: Reset Control Module Driver

Overview

The KSDK provides a Peripheral driver for the Reset Control Module (RCM) module of Kinetis devices.

Data Structures
struct	rcm_reset_pin_filter_config_t
	Reset pin filter configuration. More...

Enumerations
enum	rcm_reset_source_t {   kRCM_SourceLvd = RCM_SRS0_LVD_MASK,   kRCM_SourceWdog = RCM_SRS0_WDOG_MASK,   kRCM_SourcePin = RCM_SRS0_PIN_MASK,   kRCM_SourcePor = RCM_SRS0_POR_MASK,   kRCM_SourceLockup = RCM_SRS1_LOCKUP_MASK << 8U,   kRCM_SourceSw = RCM_SRS1_SW_MASK << 8U,   kRCM_SourceSackerr = RCM_SRS1_SACKERR_MASK << 8U }
	System Reset Source Name definitions. More...
enum	rcm_run_wait_filter_mode_t {   kRCM_FilterDisable = 0U,   kRCM_FilterBusClock = 1U,   kRCM_FilterLpoClock = 2U }
	Reset pin filter select in Run and Wait modes. More...

Driver version
#define	FSL_RCM_DRIVER_VERSION   (MAKE_VERSION(2, 0, 1))
	RCM driver version 2.0.1. More...

Reset Control Module APIs
static uint32_t	RCM_GetPreviousResetSources (RCM_Type *base)
	Gets the reset source status which caused a previous reset. More...
void	RCM_ConfigureResetPinFilter (RCM_Type *base, const rcm_reset_pin_filter_config_t *config)
	Configures the reset pin filter. More...

---

Data Structure Documentation

struct rcm_reset_pin_filter_config_t

Data Fields
bool	enableFilterInStop
	Reset pin filter select in stop mode. More...
rcm_run_wait_filter_mode_t	filterInRunWait
	Reset pin filter in run/wait mode. More...
uint8_t	busClockFilterCount
	Reset pin bus clock filter width. More...

Field Documentation

bool rcm_reset_pin_filter_config_t::enableFilterInStop

rcm_run_wait_filter_mode_t rcm_reset_pin_filter_config_t::filterInRunWait

uint8_t rcm_reset_pin_filter_config_t::busClockFilterCount

Macro Definition Documentation

#define FSL_RCM_DRIVER_VERSION   (MAKE_VERSION(2, 0, 1))

Enumeration Type Documentation

enum rcm_reset_source_t

Enumerator
kRCM_SourceLvd	Low-voltage detect reset.
kRCM_SourceWdog	Watchdog reset.
kRCM_SourcePin	External pin reset.
kRCM_SourcePor	Power on reset.
kRCM_SourceLockup	Core lock up reset.
kRCM_SourceSw	Software reset.
kRCM_SourceSackerr	Parameter could get all reset flags.

enum rcm_run_wait_filter_mode_t

Enumerator
kRCM_FilterDisable	All filtering disabled.
kRCM_FilterBusClock	Bus clock filter enabled.
kRCM_FilterLpoClock	LPO clock filter enabled.

Function Documentation

static uint32_t RCM_GetPreviousResetSources ( RCM_Type *  base )

inlinestatic

This function gets the current reset source status. Use source masks defined in the rcm_reset_source_t to get the desired source status.

Example:

uint32_t resetStatus;

// To get all reset source statuses.
resetStatus = RCM_GetPreviousResetSources(RCM) & kRCM_SourceAll;

// To test whether the MCU is reset using Watchdog.
resetStatus = RCM_GetPreviousResetSources(RCM) & kRCM_SourceWdog;

// To test multiple reset sources.
resetStatus = RCM_GetPreviousResetSources(RCM) & (kRCM_SourceWdog | kRCM_SourcePin);

Parameters

base	RCM peripheral base address.

Returns

All reset source status bit map.

void RCM_ConfigureResetPinFilter	(	RCM_Type *	base,
		const rcm_reset_pin_filter_config_t *	config
	)

This function sets the reset pin filter including the filter source, filter width, and so on.

Parameters

base	RCM peripheral base address.
config	Pointer to the configuration structure.