Overview

The flash provides the C90TFS Flash driver of MCUXpresso SDK devices with the C90TFS Flash module inside. The flash driver provides general APIs to handle specific operations on C90TFS/FTFx Flash module. The user can use those APIs directly in the application. In addition, it provides internal functions called by the driver. Although these functions are not meant to be called from the user's application directly, the APIs can still be used.

Data Structures
struct	flash_execute_in_ram_function_config_t
	Flash execute-in-RAM function information. More...

struct	flash_swap_state_config_t
	Flash Swap information. More...

struct	flash_swap_ifr_field_config_t
	Flash Swap IFR fields. More...

union	flash_swap_ifr_field_data_t
	Flash Swap IFR field data. More...

union	pflash_protection_status_low_t
	PFlash protection status - low 32bit. More...

struct	pflash_protection_status_t
	PFlash protection status - full. More...

struct	flash_prefetch_speculation_status_t
	Flash prefetch speculation status. More...

struct	flash_protection_config_t
	Active flash protection information for the current operation. More...

struct	flash_access_config_t
	Active flash Execute-Only access information for the current operation. More...

struct	flash_operation_config_t
	Active flash information for the current operation. More...

struct	flash_config_t
	Flash driver state information. More...

Typedefs
typedef void(*	flash_callback_t )(void)
	A callback type used for the Pflash block.

Enumerations
enum	flash_margin_value_t { kFLASH_MarginValueNormal, kFLASH_MarginValueUser, kFLASH_MarginValueFactory, kFLASH_MarginValueInvalid }
	Enumeration for supported flash margin levels. More...

enum	flash_security_state_t { kFLASH_SecurityStateNotSecure, kFLASH_SecurityStateBackdoorEnabled, kFLASH_SecurityStateBackdoorDisabled }
	Enumeration for the three possible flash security states. More...

enum	flash_protection_state_t { kFLASH_ProtectionStateUnprotected, kFLASH_ProtectionStateProtected, kFLASH_ProtectionStateMixed }
	Enumeration for the three possible flash protection levels. More...

enum	flash_execute_only_access_state_t { kFLASH_AccessStateUnLimited, kFLASH_AccessStateExecuteOnly, kFLASH_AccessStateMixed }
	Enumeration for the three possible flash execute access levels. More...

enum	flash_property_tag_t { kFLASH_PropertyPflashSectorSize = 0x00U, kFLASH_PropertyPflashTotalSize = 0x01U, kFLASH_PropertyPflashBlockSize = 0x02U, kFLASH_PropertyPflashBlockCount = 0x03U, kFLASH_PropertyPflashBlockBaseAddr = 0x04U, kFLASH_PropertyPflashFacSupport = 0x05U, kFLASH_PropertyPflashAccessSegmentSize = 0x06U, kFLASH_PropertyPflashAccessSegmentCount = 0x07U, kFLASH_PropertyFlexRamBlockBaseAddr = 0x08U, kFLASH_PropertyFlexRamTotalSize = 0x09U, kFLASH_PropertyDflashSectorSize = 0x10U, kFLASH_PropertyDflashTotalSize = 0x11U, kFLASH_PropertyDflashBlockSize = 0x12U, kFLASH_PropertyDflashBlockCount = 0x13U, kFLASH_PropertyDflashBlockBaseAddr = 0x14U, kFLASH_PropertyEepromTotalSize = 0x15U, kFLASH_PropertyFlashMemoryIndex = 0x20U, kFLASH_PropertyFlashCacheControllerIndex = 0x21U }
	Enumeration for various flash properties. More...

enum	_flash_execute_in_ram_function_constants { kFLASH_ExecuteInRamFunctionMaxSizeInWords = 16U, kFLASH_ExecuteInRamFunctionTotalNum = 2U }
	Constants for execute-in-RAM flash function. More...

enum	flash_read_resource_option_t { kFLASH_ResourceOptionFlashIfr, kFLASH_ResourceOptionVersionId = 0x01U }
	Enumeration for the two possible options of flash read resource command. More...

enum	_flash_read_resource_range { kFLASH_ResourceRangePflashIfrSizeInBytes = 256U, kFLASH_ResourceRangeVersionIdSizeInBytes = 8U, kFLASH_ResourceRangeVersionIdStart = 0x00U, kFLASH_ResourceRangeVersionIdEnd = 0x07U , kFLASH_ResourceRangePflashSwapIfrEnd, kFLASH_ResourceRangeDflashIfrStart = 0x800000U, kFLASH_ResourceRangeDflashIfrEnd = 0x8003FFU }
	Enumeration for the range of special-purpose flash resource. More...

enum	_k3_flash_read_once_index { kFLASH_RecordIndexSwapAddr = 0xA1U, kFLASH_RecordIndexSwapEnable = 0xA2U, kFLASH_RecordIndexSwapDisable = 0xA3U }
	Enumeration for the index of read/program once record. More...

enum	flash_flexram_function_option_t { kFLASH_FlexramFunctionOptionAvailableAsRam = 0xFFU, kFLASH_FlexramFunctionOptionAvailableForEeprom = 0x00U }
	Enumeration for the two possilbe options of set FlexRAM function command. More...

enum	_flash_acceleration_ram_property
	Enumeration for acceleration RAM property.

enum	flash_swap_function_option_t { kFLASH_SwapFunctionOptionEnable = 0x00U, kFLASH_SwapFunctionOptionDisable = 0x01U }
	Enumeration for the possible options of Swap function. More...

enum	flash_swap_control_option_t { kFLASH_SwapControlOptionIntializeSystem = 0x01U, kFLASH_SwapControlOptionSetInUpdateState = 0x02U, kFLASH_SwapControlOptionSetInCompleteState = 0x04U, kFLASH_SwapControlOptionReportStatus = 0x08U, kFLASH_SwapControlOptionDisableSystem = 0x10U }
	Enumeration for the possible options of Swap control commands. More...

enum	flash_swap_state_t { kFLASH_SwapStateUninitialized = 0x00U, kFLASH_SwapStateReady = 0x01U, kFLASH_SwapStateUpdate = 0x02U, kFLASH_SwapStateUpdateErased = 0x03U, kFLASH_SwapStateComplete = 0x04U, kFLASH_SwapStateDisabled = 0x05U }
	Enumeration for the possible flash Swap status. More...

enum	flash_swap_block_status_t { kFLASH_SwapBlockStatusLowerHalfProgramBlocksAtZero, kFLASH_SwapBlockStatusUpperHalfProgramBlocksAtZero }
	Enumeration for the possible flash Swap block status More...

enum	flash_partition_flexram_load_option_t { kFLASH_PartitionFlexramLoadOptionLoadedWithValidEepromData, kFLASH_PartitionFlexramLoadOptionNotLoaded = 0x01U }
	Enumeration for the FlexRAM load during reset option. More...

enum	flash_memory_index_t { kFLASH_MemoryIndexPrimaryFlash = 0x00U, kFLASH_MemoryIndexSecondaryFlash = 0x01U }
	Enumeration for the flash memory index. More...

enum	flash_cache_controller_index_t { kFLASH_CacheControllerIndexForCore0 = 0x00U, kFLASH_CacheControllerIndexForCore1 = 0x01U }
	Enumeration for the flash cache controller index. More...

enum	flash_prefetch_speculation_option_t
	Enumeration for the two possible options of flash prefetch speculation.

enum	flash_cache_clear_process_t { kFLASH_CacheClearProcessPre = 0x00U, kFLASH_CacheClearProcessPost = 0x01U }
	Flash cache clear process code. More...

Flash version
enum	_flash_driver_version_constants { kFLASH_DriverVersionName = 'F', kFLASH_DriverVersionMajor = 2, kFLASH_DriverVersionMinor = 3, kFLASH_DriverVersionBugfix = 1 }
	Flash driver version for ROM. More...

#define	MAKE_VERSION(major, minor, bugfix) (((major) << 16) \| ((minor) << 8) \| (bugfix))
	Constructs the version number for drivers. More...

#define	FSL_FLASH_DRIVER_VERSION (MAKE_VERSION(2, 3, 1))
	Flash driver version for SDK. More...

Flash configuration
#define	FLASH_SSD_CONFIG_ENABLE_FLEXNVM_SUPPORT 1
	Indicates whether to support FlexNVM in the Flash driver. More...

#define	FLASH_SSD_IS_FLEXNVM_ENABLED (FLASH_SSD_CONFIG_ENABLE_FLEXNVM_SUPPORT && FSL_FEATURE_FLASH_HAS_FLEX_NVM)
	Indicates whether the FlexNVM is enabled in the Flash driver.

#define	FLASH_SSD_CONFIG_ENABLE_SECONDARY_FLASH_SUPPORT 1
	Indicates whether to support Secondary flash in the Flash driver. More...

#define	FLASH_SSD_IS_SECONDARY_FLASH_ENABLED (0)
	Indicates whether the secondary flash is supported in the Flash driver.

#define	FLASH_DRIVER_IS_FLASH_RESIDENT 1
	Flash driver location. More...

#define	FLASH_DRIVER_IS_EXPORTED 0
	Flash Driver Export option. More...

Flash status
enum	_flash_status { kStatus_FLASH_Success = MAKE_STATUS(kStatusGroupGeneric, 0), kStatus_FLASH_InvalidArgument = MAKE_STATUS(kStatusGroupGeneric, 4), kStatus_FLASH_SizeError = MAKE_STATUS(kStatusGroupFlashDriver, 0), kStatus_FLASH_AlignmentError, kStatus_FLASH_AddressError = MAKE_STATUS(kStatusGroupFlashDriver, 2), kStatus_FLASH_AccessError, kStatus_FLASH_ProtectionViolation, kStatus_FLASH_CommandFailure, kStatus_FLASH_UnknownProperty = MAKE_STATUS(kStatusGroupFlashDriver, 6), kStatus_FLASH_EraseKeyError = MAKE_STATUS(kStatusGroupFlashDriver, 7), kStatus_FLASH_RegionExecuteOnly, kStatus_FLASH_ExecuteInRamFunctionNotReady, kStatus_FLASH_PartitionStatusUpdateFailure, kStatus_FLASH_SetFlexramAsEepromError, kStatus_FLASH_RecoverFlexramAsRamError, kStatus_FLASH_SetFlexramAsRamError = MAKE_STATUS(kStatusGroupFlashDriver, 13), kStatus_FLASH_RecoverFlexramAsEepromError, kStatus_FLASH_CommandNotSupported = MAKE_STATUS(kStatusGroupFlashDriver, 15), kStatus_FLASH_SwapSystemNotInUninitialized, kStatus_FLASH_SwapIndicatorAddressError, kStatus_FLASH_ReadOnlyProperty = MAKE_STATUS(kStatusGroupFlashDriver, 18), kStatus_FLASH_InvalidPropertyValue, kStatus_FLASH_InvalidSpeculationOption }
	Flash driver status codes. More...

#define	kStatusGroupGeneric 0
	Flash driver status group. More...

#define	kStatusGroupFlashDriver 1

#define	MAKE_STATUS(group, code) ((((group)*100) + (code)))
	Constructs a status code value from a group and a code number. More...

Flash API key
enum	_flash_driver_api_keys { kFLASH_ApiEraseKey = FOUR_CHAR_CODE('k', 'f', 'e', 'k') }
	Enumeration for Flash driver API keys. More...

#define	FOUR_CHAR_CODE(a, b, c, d) (((d) << 24) \| ((c) << 16) \| ((b) << 8) \| ((a)))
	Constructs the four character code for the Flash driver API key. More...

Initialization
status_t	FLASH_Init (flash_config_t *config)
	Initializes the global flash properties structure members. More...

status_t	FLASH_SetCallback (flash_config_t *config, flash_callback_t callback)
	Sets the desired flash callback function. More...

status_t	FLASH_PrepareExecuteInRamFunctions (flash_config_t *config)
	Prepares flash execute-in-RAM functions. More...

Erasing
status_t	FLASH_EraseAll (flash_config_t *config, uint32_t key)
	Erases entire flash. More...

status_t	FLASH_Erase (flash_config_t *config, uint32_t start, uint32_t lengthInBytes, uint32_t key)
	Erases the flash sectors encompassed by parameters passed into function. More...

status_t	FLASH_EraseAllUnsecure (flash_config_t *config, uint32_t key)
	Erases the entire flash, including protected sectors. More...

status_t	FLASH_EraseAllExecuteOnlySegments (flash_config_t *config, uint32_t key)
	Erases all program flash execute-only segments defined by the FXACC registers. More...

Programming
status_t	FLASH_Program (flash_config_t config, uint32_t start, uint32_t src, uint32_t lengthInBytes)
	Programs flash with data at locations passed in through parameters. More...

status_t	FLASH_ProgramOnce (flash_config_t config, uint32_t index, uint32_t src, uint32_t lengthInBytes)
	Programs Program Once Field through parameters. More...

Reading

Programs flash with data at locations passed in through parameters via the Program Section command.

This function programs the flash memory with the desired data for a given flash area as determined by the start address and length.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be programmed. Must be word-aligned.
src	A pointer to the source buffer of data that is to be programmed into the flash.
lengthInBytes	The length, given in bytes (not words or long-words), to be programmed. Must be word-aligned.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError	Address is out of range.
kStatus_FLASH_SetFlexramAsRamError	Failed to set flexram as RAM.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during command execution.
kStatus_FLASH_RecoverFlexramAsEepromError	Failed to recover FlexRAM as EEPROM.

Programs the EEPROM with data at locations passed in through parameters.

This function programs the emulated EEPROM with the desired data for a given flash area as determined by the start address and length.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be programmed. Must be word-aligned.
src	A pointer to the source buffer of data that is to be programmed into the flash.
lengthInBytes	The length, given in bytes (not words or long-words), to be programmed. Must be word-aligned.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AddressError	Address is out of range.
kStatus_FLASH_SetFlexramAsEepromError	Failed to set flexram as eeprom.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_RecoverFlexramAsRamError	Failed to recover the FlexRAM as RAM.

status_t FLASH_ReadResource (flash_config_t *config, uint32_t start, uint32_t *dst, uint32_t lengthInBytes, flash_read_resource_option_t option)

Reads the resource with data at locations passed in through parameters. More...

status_t FLASH_ReadOnce (flash_config_t *config, uint32_t index, uint32_t *dst, uint32_t lengthInBytes)

Reads the Program Once Field through parameters. More...

Security
status_t	FLASH_GetSecurityState (flash_config_t config, flash_security_state_t state)
	Returns the security state via the pointer passed into the function. More...

status_t	FLASH_SecurityBypass (flash_config_t config, const uint8_t backdoorKey)
	Allows users to bypass security with a backdoor key. More...

Verification
status_t	FLASH_VerifyEraseAll (flash_config_t *config, flash_margin_value_t margin)
	Verifies erasure of the entire flash at a specified margin level. More...

status_t	FLASH_VerifyErase (flash_config_t *config, uint32_t start, uint32_t lengthInBytes, flash_margin_value_t margin)
	Verifies an erasure of the desired flash area at a specified margin level. More...

status_t	FLASH_VerifyProgram (flash_config_t config, uint32_t start, uint32_t lengthInBytes, const uint32_t expectedData, flash_margin_value_t margin, uint32_t failedAddress, uint32_t failedData)
	Verifies programming of the desired flash area at a specified margin level. More...

status_t	FLASH_VerifyEraseAllExecuteOnlySegments (flash_config_t *config, flash_margin_value_t margin)
	Verifies whether the program flash execute-only segments have been erased to the specified read margin level. More...

Protection
status_t	FLASH_IsProtected (flash_config_t config, uint32_t start, uint32_t lengthInBytes, flash_protection_state_t protection_state)
	Returns the protection state of the desired flash area via the pointer passed into the function. More...

status_t	FLASH_IsExecuteOnly (flash_config_t config, uint32_t start, uint32_t lengthInBytes, flash_execute_only_access_state_t access_state)
	Returns the access state of the desired flash area via the pointer passed into the function. More...

Properties
status_t	FLASH_GetProperty (flash_config_t config, flash_property_tag_t whichProperty, uint32_t value)
	Returns the desired flash property. More...

status_t	FLASH_SetProperty (flash_config_t *config, flash_property_tag_t whichProperty, uint32_t value)
	Sets the desired flash property. More...

Flash Protection Utilities

Prepares the FlexNVM block for use as data flash, EEPROM backup, or a combination of both and initializes the FlexRAM.

Parameters

config	Pointer to storage for the driver runtime state.
option	The option used to set FlexRAM load behavior during reset.
eepromDataSizeCode	Determines the amount of FlexRAM used in each of the available EEPROM subsystems.
flexnvmPartitionCode	Specifies how to split the FlexNVM block between data flash memory and EEPROM backup memory supporting EEPROM functions.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	Invalid argument is provided.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during command execution.

status_t FLASH_PflashSetProtection (flash_config_t *config, pflash_protection_status_t *protectStatus)

Sets the PFlash Protection to the intended protection status. More...

status_t FLASH_PflashGetProtection (flash_config_t *config, pflash_protection_status_t *protectStatus)

Gets the PFlash protection status. More...

Data Structure Documentation

struct flash_execute_in_ram_function_config_t

Data Fields
uint32_t	activeFunctionCount
	Number of available execute-in-RAM functions. More...

uint32_t *	flashRunCommand
	Execute-in-RAM function: flash_run_command. More...

uint32_t *	flashCommonBitOperation
	Execute-in-RAM function: flash_common_bit_operation. More...

Field Documentation

uint32_t flash_execute_in_ram_function_config_t::activeFunctionCount

uint32_t* flash_execute_in_ram_function_config_t::flashRunCommand

uint32_t* flash_execute_in_ram_function_config_t::flashCommonBitOperation

struct flash_swap_state_config_t

Data Fields
flash_swap_state_t	flashSwapState
	The current Swap system status. More...

flash_swap_block_status_t	currentSwapBlockStatus
	The current Swap block status. More...

flash_swap_block_status_t	nextSwapBlockStatus
	The next Swap block status. More...

Field Documentation

flash_swap_state_t flash_swap_state_config_t::flashSwapState

flash_swap_block_status_t flash_swap_state_config_t::currentSwapBlockStatus

flash_swap_block_status_t flash_swap_state_config_t::nextSwapBlockStatus

struct flash_swap_ifr_field_config_t

Data Fields
uint16_t	swapIndicatorAddress
	A Swap indicator address field. More...

uint16_t	swapEnableWord
	A Swap enable word field. More...

uint8_t	reserved0 [4]
	A reserved field. More...

Field Documentation

uint16_t flash_swap_ifr_field_config_t::swapIndicatorAddress

uint16_t flash_swap_ifr_field_config_t::swapEnableWord

uint8_t flash_swap_ifr_field_config_t::reserved0[4]

union flash_swap_ifr_field_data_t

Data Fields
uint32_t	flashSwapIfrData [2]
	A flash Swap IFR field data . More...

flash_swap_ifr_field_config_t	flashSwapIfrField
	A flash Swap IFR field structure. More...

Field Documentation

uint32_t flash_swap_ifr_field_data_t::flashSwapIfrData[2]

flash_swap_ifr_field_config_t flash_swap_ifr_field_data_t::flashSwapIfrField

union pflash_protection_status_low_t

Data Fields
uint32_t	protl32b
	PROT[31:0] . More...

uint8_t	protsl
	PROTS[7:0] . More...

uint8_t	protsh
	PROTS[15:8] . More...

Field Documentation

uint32_t pflash_protection_status_low_t::protl32b

uint8_t pflash_protection_status_low_t::protsl

uint8_t pflash_protection_status_low_t::protsh

struct pflash_protection_status_t

Data Fields
pflash_protection_status_low_t	valueLow32b
	PROT[31:0] or PROTS[15:0]. More...

Field Documentation

pflash_protection_status_low_t pflash_protection_status_t::valueLow32b

struct flash_prefetch_speculation_status_t

Data Fields
flash_prefetch_speculation_option_t	instructionOption
	Instruction speculation. More...

flash_prefetch_speculation_option_t	dataOption
	Data speculation. More...

Field Documentation

flash_prefetch_speculation_option_t flash_prefetch_speculation_status_t::instructionOption

flash_prefetch_speculation_option_t flash_prefetch_speculation_status_t::dataOption

struct flash_protection_config_t

Data Fields
uint32_t	regionBase
	Base address of flash protection region. More...

uint32_t	regionSize
	size of flash protection region. More...

uint32_t	regionCount
	flash protection region count. More...

Field Documentation

uint32_t flash_protection_config_t::regionBase

uint32_t flash_protection_config_t::regionSize

uint32_t flash_protection_config_t::regionCount

struct flash_access_config_t

Data Fields
uint32_t	SegmentBase
	Base address of flash Execute-Only segment. More...

uint32_t	SegmentSize
	size of flash Execute-Only segment. More...

uint32_t	SegmentCount
	flash Execute-Only segment count. More...

Field Documentation

uint32_t flash_access_config_t::SegmentBase

uint32_t flash_access_config_t::SegmentSize

uint32_t flash_access_config_t::SegmentCount

struct flash_operation_config_t

Data Fields
uint32_t	convertedAddress
	A converted address for the current flash type. More...

uint32_t	activeSectorSize
	A sector size of the current flash type. More...

uint32_t	activeBlockSize
	A block size of the current flash type. More...

uint32_t	blockWriteUnitSize
	The write unit size. More...

uint32_t	sectorCmdAddressAligment
	An erase sector command address alignment. More...

uint32_t	sectionCmdAddressAligment
	A program/verify section command address alignment. More...

uint32_t	resourceCmdAddressAligment
	A read resource command address alignment. More...

uint32_t	checkCmdAddressAligment
	A program check command address alignment. More...

Field Documentation

uint32_t flash_operation_config_t::convertedAddress

uint32_t flash_operation_config_t::activeSectorSize

uint32_t flash_operation_config_t::activeBlockSize

uint32_t flash_operation_config_t::blockWriteUnitSize

uint32_t flash_operation_config_t::sectorCmdAddressAligment

uint32_t flash_operation_config_t::sectionCmdAddressAligment

uint32_t flash_operation_config_t::resourceCmdAddressAligment

uint32_t flash_operation_config_t::checkCmdAddressAligment

struct flash_config_t

An instance of this structure is allocated by the user of the flash driver and passed into each of the driver APIs.

Data Fields
uint32_t	PFlashBlockBase
	A base address of the first PFlash block.

uint32_t	PFlashTotalSize
	The size of the combined PFlash block. More...

uint8_t	PFlashBlockCount
	A number of PFlash blocks. More...

uint8_t	FlashMemoryIndex
	0 - primary flash; 1 - secondary flash

uint8_t	FlashCacheControllerIndex
	0 - Controller for core 0; 1 - Controller for core 1

uint8_t	Reserved0
	Reserved field 0.

uint32_t	PFlashSectorSize
	The size in bytes of a sector of PFlash. More...

flash_callback_t	PFlashCallback
	The callback function for the flash API. More...

uint32_t	PFlashAccessSegmentSize
	A size in bytes of an access segment of PFlash. More...

uint32_t	PFlashAccessSegmentCount
	A number of PFlash access segments. More...

uint32_t *	flashExecuteInRamFunctionInfo
	An information structure of the flash execute-in-RAM function. More...

uint32_t	FlexRAMBlockBase
	For the FlexNVM device, this is the base address of the FlexRAM. More...

uint32_t	FlexRAMTotalSize
	For the FlexNVM device, this is the size of the FlexRAM. More...

uint32_t	DFlashBlockBase
	For the FlexNVM device, this is the base address of the D-Flash memory (FlexNVM memory) More...

uint32_t	DFlashTotalSize
	For the FlexNVM device, this is the total size of the FlexNVM memory;. More...

uint32_t	EEpromTotalSize
	For the FlexNVM device, this is the size in bytes of the EEPROM area which was partitioned from FlexRAM. More...

Field Documentation

uint32_t flash_config_t::PFlashTotalSize

uint8_t flash_config_t::PFlashBlockCount

uint32_t flash_config_t::PFlashSectorSize

flash_callback_t flash_config_t::PFlashCallback

uint32_t flash_config_t::PFlashAccessSegmentSize

uint32_t flash_config_t::PFlashAccessSegmentCount

uint32_t* flash_config_t::flashExecuteInRamFunctionInfo

uint32_t flash_config_t::FlexRAMBlockBase

For the non-FlexNVM device, this is the base address of the acceleration RAM memory

uint32_t flash_config_t::FlexRAMTotalSize

For the non-FlexNVM device, this is the size of the acceleration RAM memory

uint32_t flash_config_t::DFlashBlockBase

For the non-FlexNVM device, this field is unused

uint32_t flash_config_t::DFlashTotalSize

For the non-FlexNVM device, this field is unused

uint32_t flash_config_t::EEpromTotalSize

For the non-FlexNVM device, this field is unused

Macro Definition Documentation

#define MAKE_VERSION	(	major,
		minor,
		bugfix
	)	(((major) << 16) \| ((minor) << 8) \| (bugfix))

#define FSL_FLASH_DRIVER_VERSION (MAKE_VERSION(2, 3, 1))

Version 2.3.1.

#define FLASH_SSD_CONFIG_ENABLE_FLEXNVM_SUPPORT 1

Enables the FlexNVM support by default.

#define FLASH_SSD_CONFIG_ENABLE_SECONDARY_FLASH_SUPPORT 1

Enables the secondary flash support by default.

#define FLASH_DRIVER_IS_FLASH_RESIDENT 1

Used for the flash resident application.

#define FLASH_DRIVER_IS_EXPORTED 0

Used for the KSDK application.

#define kStatusGroupGeneric 0

#define MAKE_STATUS	(	group,
		code
	)	((((group)*100) + (code)))

#define FOUR_CHAR_CODE	(	a,
		b,
		c,
		d
	)	(((d) << 24) \| ((c) << 16) \| ((b) << 8) \| ((a)))

Enumeration Type Documentation

enum _flash_driver_version_constants

Enumerator
kFLASH_DriverVersionName	Flash driver version name.
kFLASH_DriverVersionMajor	Major flash driver version.
kFLASH_DriverVersionMinor	Minor flash driver version.
kFLASH_DriverVersionBugfix	Bugfix for flash driver version.

enum _flash_status

Enumerator
kStatus_FLASH_Success	API is executed successfully.
kStatus_FLASH_InvalidArgument	Invalid argument.
kStatus_FLASH_SizeError	Error size.
kStatus_FLASH_AlignmentError	Parameter is not aligned with the specified baseline.
kStatus_FLASH_AddressError	Address is out of range.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bound addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during command execution.
kStatus_FLASH_UnknownProperty	Unknown property.
kStatus_FLASH_EraseKeyError	API erase key is invalid.
kStatus_FLASH_RegionExecuteOnly	The current region is execute-only.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_PartitionStatusUpdateFailure	Failed to update partition status.
kStatus_FLASH_SetFlexramAsEepromError	Failed to set FlexRAM as EEPROM.
kStatus_FLASH_RecoverFlexramAsRamError	Failed to recover FlexRAM as RAM.
kStatus_FLASH_SetFlexramAsRamError	Failed to set FlexRAM as RAM.
kStatus_FLASH_RecoverFlexramAsEepromError	Failed to recover FlexRAM as EEPROM.
kStatus_FLASH_CommandNotSupported	Flash API is not supported.
kStatus_FLASH_SwapSystemNotInUninitialized	Swap system is not in an uninitialzed state.
kStatus_FLASH_SwapIndicatorAddressError	The swap indicator address is invalid.
kStatus_FLASH_ReadOnlyProperty	The flash property is read-only.
kStatus_FLASH_InvalidPropertyValue	The flash property value is out of range.
kStatus_FLASH_InvalidSpeculationOption	The option of flash prefetch speculation is invalid.

enum _flash_driver_api_keys

Note: The resulting value is built with a byte order such that the string being readable in expected order when viewed in a hex editor, if the value is treated as a 32-bit little endian value.

Enumerator
kFLASH_ApiEraseKey	Key value used to validate all flash erase APIs.

enum flash_margin_value_t

Enumerator
kFLASH_MarginValueNormal	Use the 'normal' read level for 1s.
kFLASH_MarginValueUser	Apply the 'User' margin to the normal read-1 level.
kFLASH_MarginValueFactory	Apply the 'Factory' margin to the normal read-1 level.
kFLASH_MarginValueInvalid	Not real margin level, Used to determine the range of valid margin level.

enum flash_security_state_t

Enumerator
kFLASH_SecurityStateNotSecure	Flash is not secure.
kFLASH_SecurityStateBackdoorEnabled	Flash backdoor is enabled.
kFLASH_SecurityStateBackdoorDisabled	Flash backdoor is disabled.

enum flash_protection_state_t

Enumerator
kFLASH_ProtectionStateUnprotected	Flash region is not protected.
kFLASH_ProtectionStateProtected	Flash region is protected.
kFLASH_ProtectionStateMixed	Flash is mixed with protected and unprotected region.

enum flash_execute_only_access_state_t

Enumerator
kFLASH_AccessStateUnLimited	Flash region is unlimited.
kFLASH_AccessStateExecuteOnly	Flash region is execute only.
kFLASH_AccessStateMixed	Flash is mixed with unlimited and execute only region.

enum flash_property_tag_t

Enumerator
kFLASH_PropertyPflashSectorSize	Pflash sector size property.
kFLASH_PropertyPflashTotalSize	Pflash total size property.
kFLASH_PropertyPflashBlockSize	Pflash block size property.
kFLASH_PropertyPflashBlockCount	Pflash block count property.
kFLASH_PropertyPflashBlockBaseAddr	Pflash block base address property.
kFLASH_PropertyPflashFacSupport	Pflash fac support property.
kFLASH_PropertyPflashAccessSegmentSize	Pflash access segment size property.
kFLASH_PropertyPflashAccessSegmentCount	Pflash access segment count property.
kFLASH_PropertyFlexRamBlockBaseAddr	FlexRam block base address property.
kFLASH_PropertyFlexRamTotalSize	FlexRam total size property.
kFLASH_PropertyDflashSectorSize	Dflash sector size property.
kFLASH_PropertyDflashTotalSize	Dflash total size property.
kFLASH_PropertyDflashBlockSize	Dflash block size property.
kFLASH_PropertyDflashBlockCount	Dflash block count property.
kFLASH_PropertyDflashBlockBaseAddr	Dflash block base address property.
kFLASH_PropertyEepromTotalSize	EEPROM total size property.
kFLASH_PropertyFlashMemoryIndex	Flash memory index property.
kFLASH_PropertyFlashCacheControllerIndex	Flash cache controller index property.

enum _flash_execute_in_ram_function_constants

Enumerator
kFLASH_ExecuteInRamFunctionMaxSizeInWords	The maximum size of execute-in-RAM function.
kFLASH_ExecuteInRamFunctionTotalNum	Total number of execute-in-RAM functions.

enum flash_read_resource_option_t

Enumerator
kFLASH_ResourceOptionFlashIfr	Select code for Program flash 0 IFR, Program flash swap 0 IFR, Data flash 0 IFR.
kFLASH_ResourceOptionVersionId	Select code for the version ID.

enum _flash_read_resource_range

Enumerator
kFLASH_ResourceRangePflashIfrSizeInBytes	Pflash IFR size in byte.
kFLASH_ResourceRangeVersionIdSizeInBytes	Version ID IFR size in byte.
kFLASH_ResourceRangeVersionIdStart	Version ID IFR start address.
kFLASH_ResourceRangeVersionIdEnd	Version ID IFR end address.
kFLASH_ResourceRangePflashSwapIfrEnd	Pflash swap IFR end address.
kFLASH_ResourceRangeDflashIfrStart	Dflash IFR start address.
kFLASH_ResourceRangeDflashIfrEnd	Dflash IFR end address.

enum _k3_flash_read_once_index

Enumerator
kFLASH_RecordIndexSwapAddr	Index of Swap indicator address.
kFLASH_RecordIndexSwapEnable	Index of Swap system enable.
kFLASH_RecordIndexSwapDisable	Index of Swap system disable.

enum flash_flexram_function_option_t

Enumerator
kFLASH_FlexramFunctionOptionAvailableAsRam	An option used to make FlexRAM available as RAM.
kFLASH_FlexramFunctionOptionAvailableForEeprom	An option used to make FlexRAM available for EEPROM.

enum flash_swap_function_option_t

Enumerator
kFLASH_SwapFunctionOptionEnable	An option used to enable the Swap function.
kFLASH_SwapFunctionOptionDisable	An option used to disable the Swap function.

enum flash_swap_control_option_t

Enumerator
kFLASH_SwapControlOptionIntializeSystem	An option used to initialize the Swap system.
kFLASH_SwapControlOptionSetInUpdateState	An option used to set the Swap in an update state.
kFLASH_SwapControlOptionSetInCompleteState	An option used to set the Swap in a complete state.
kFLASH_SwapControlOptionReportStatus	An option used to report the Swap status.
kFLASH_SwapControlOptionDisableSystem	An option used to disable the Swap status.

enum flash_swap_state_t

Enumerator
kFLASH_SwapStateUninitialized	Flash Swap system is in an uninitialized state.
kFLASH_SwapStateReady	Flash Swap system is in a ready state.
kFLASH_SwapStateUpdate	Flash Swap system is in an update state.
kFLASH_SwapStateUpdateErased	Flash Swap system is in an updateErased state.
kFLASH_SwapStateComplete	Flash Swap system is in a complete state.
kFLASH_SwapStateDisabled	Flash Swap system is in a disabled state.

enum flash_swap_block_status_t

Enumerator
kFLASH_SwapBlockStatusLowerHalfProgramBlocksAtZero	Swap block status is that lower half program block at zero.
kFLASH_SwapBlockStatusUpperHalfProgramBlocksAtZero	Swap block status is that upper half program block at zero.

enum flash_partition_flexram_load_option_t

Enumerator
kFLASH_PartitionFlexramLoadOptionLoadedWithValidEepromData	FlexRAM is loaded with valid EEPROM data during reset sequence.
kFLASH_PartitionFlexramLoadOptionNotLoaded	FlexRAM is not loaded during reset sequence.

enum flash_memory_index_t

Enumerator
kFLASH_MemoryIndexPrimaryFlash	Current flash memory is primary flash.
kFLASH_MemoryIndexSecondaryFlash	Current flash memory is secondary flash.

enum flash_cache_controller_index_t

Enumerator
kFLASH_CacheControllerIndexForCore0	Current flash cache controller is for core 0.
kFLASH_CacheControllerIndexForCore1	Current flash cache controller is for core 1.

enum flash_cache_clear_process_t

Enumerator
kFLASH_CacheClearProcessPre	Pre flash cache clear process.
kFLASH_CacheClearProcessPost	Post flash cache clear process.

Function Documentation

status_t FLASH_Init ( flash_config_t * config )

This function checks and initializes the Flash module for the other Flash APIs.

Parameters

config Pointer to the storage for the driver runtime state.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_PartitionStatusUpdateFailure	Failed to update the partition status.

status_t FLASH_SetCallback	(	flash_config_t *	config,
		flash_callback_t	callback
	)

Parameters

config	Pointer to the storage for the driver runtime state.
callback	A callback function to be stored in the driver.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.

status_t FLASH_PrepareExecuteInRamFunctions ( flash_config_t * config )

Parameters

config Pointer to the storage for the driver runtime state.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.

status_t FLASH_EraseAll	(	flash_config_t *	config,
		uint32_t	key
	)

Parameters

config	Pointer to the storage for the driver runtime state.
key	A value used to validate all flash erase APIs.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_EraseKeyError	API erase key is invalid.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during command execution.
kStatus_FLASH_PartitionStatusUpdateFailure	Failed to update the partition status.

status_t FLASH_Erase	(	flash_config_t *	config,
		uint32_t	start,
		uint32_t	lengthInBytes,
		uint32_t	key
	)

This function erases the appropriate number of flash sectors based on the desired start address and length.

Parameters

config	The pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be erased. The start address does not need to be sector-aligned but must be word-aligned.
lengthInBytes	The length, given in bytes (not words or long-words) to be erased. Must be word-aligned.
key	The value used to validate all flash erase APIs.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	The parameter is not aligned with the specified baseline.
kStatus_FLASH_AddressError	The address is out of range.
kStatus_FLASH_EraseKeyError	The API erase key is invalid.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_EraseAllUnsecure	(	flash_config_t *	config,
		uint32_t	key
	)

Parameters

config	Pointer to the storage for the driver runtime state.
key	A value used to validate all flash erase APIs.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_EraseKeyError	API erase key is invalid.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during command execution.
kStatus_FLASH_PartitionStatusUpdateFailure	Failed to update the partition status.

status_t FLASH_EraseAllExecuteOnlySegments	(	flash_config_t *	config,
		uint32_t	key
	)

Parameters

config	Pointer to the storage for the driver runtime state.
key	A value used to validate all flash erase APIs.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_EraseKeyError	API erase key is invalid.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_Program	(	flash_config_t *	config,
		uint32_t	start,
		uint32_t *	src,
		uint32_t	lengthInBytes
	)

This function programs the flash memory with the desired data for a given flash area as determined by the start address and the length.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be programmed. Must be word-aligned.
src	A pointer to the source buffer of data that is to be programmed into the flash.
lengthInBytes	The length, given in bytes (not words or long-words), to be programmed. Must be word-aligned.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	Parameter is not aligned with the specified baseline.
kStatus_FLASH_AddressError	Address is out of range.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_ProgramOnce	(	flash_config_t *	config,
		uint32_t	index,
		uint32_t *	src,
		uint32_t	lengthInBytes
	)

This function programs the Program Once Field with the desired data for a given flash area as determined by the index and length.

Parameters

config	A pointer to the storage for the driver runtime state.
index	The index indicating which area of the Program Once Field to be programmed.
src	A pointer to the source buffer of data that is to be programmed into the Program Once Field.
lengthInBytes	The length, given in bytes (not words or long-words), to be programmed. Must be word-aligned.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_ReadResource	(	flash_config_t *	config,
		uint32_t	start,
		uint32_t *	dst,
		uint32_t	lengthInBytes,
		flash_read_resource_option_t	option
	)

This function reads the flash memory with the desired location for a given flash area as determined by the start address and length.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be programmed. Must be word-aligned.
dst	A pointer to the destination buffer of data that is used to store data to be read.
lengthInBytes	The length, given in bytes (not words or long-words), to be read. Must be word-aligned.
option	The resource option which indicates which area should be read back.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	Parameter is not aligned with the specified baseline.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_ReadOnce	(	flash_config_t *	config,
		uint32_t	index,
		uint32_t *	dst,
		uint32_t	lengthInBytes
	)

This function reads the read once feild with given index and length.

Parameters

config	A pointer to the storage for the driver runtime state.
index	The index indicating the area of program once field to be read.
dst	A pointer to the destination buffer of data that is used to store data to be read.
lengthInBytes	The length, given in bytes (not words or long-words), to be programmed. Must be word-aligned.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_GetSecurityState	(	flash_config_t *	config,
		flash_security_state_t *	state
	)

This function retrieves the current flash security status, including the security enabling state and the backdoor key enabling state.

Parameters

config	A pointer to storage for the driver runtime state.
state	A pointer to the value returned for the current security status code:

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.

status_t FLASH_SecurityBypass	(	flash_config_t *	config,
		const uint8_t *	backdoorKey
	)

If the MCU is in secured state, this function unsecures the MCU by comparing the provided backdoor key with ones in the flash configuration field.

Parameters

config	A pointer to the storage for the driver runtime state.
backdoorKey	A pointer to the user buffer containing the backdoor key.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_VerifyEraseAll	(	flash_config_t *	config,
		flash_margin_value_t	margin
	)

This function checks whether the flash is erased to the specified read margin level.

Parameters

config	A pointer to the storage for the driver runtime state.
margin	Read margin choice.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_VerifyErase	(	flash_config_t *	config,
		uint32_t	start,
		uint32_t	lengthInBytes,
		flash_margin_value_t	margin
	)

This function checks the appropriate number of flash sectors based on the desired start address and length to check whether the flash is erased to the specified read margin level.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be verified. The start address does not need to be sector-aligned but must be word-aligned.
lengthInBytes	The length, given in bytes (not words or long-words), to be verified. Must be word-aligned.
margin	Read margin choice.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError	Address is out of range.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_VerifyProgram	(	flash_config_t *	config,
		uint32_t	start,
		uint32_t	lengthInBytes,
		const uint32_t *	expectedData,
		flash_margin_value_t	margin,
		uint32_t *	failedAddress,
		uint32_t *	failedData
	)

This function verifies the data programed in the flash memory using the Flash Program Check Command and compares it to the expected data for a given flash area as determined by the start address and length.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be verified. Must be word-aligned.
lengthInBytes	The length, given in bytes (not words or long-words), to be verified. Must be word-aligned.
expectedData	A pointer to the expected data that is to be verified against.
margin	Read margin choice.
failedAddress	A pointer to the returned failing address.
failedData	A pointer to the returned failing data. Some derivatives do not include failed data as part of the FCCOBx registers. In this case, zeros are returned upon failure.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError	Address is out of range.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_VerifyEraseAllExecuteOnlySegments	(	flash_config_t *	config,
		flash_margin_value_t	margin
	)

Parameters

config	A pointer to the storage for the driver runtime state.
margin	Read margin choice.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_ExecuteInRamFunctionNotReady	Execute-in-RAM function is not available.
kStatus_FLASH_AccessError	Invalid instruction codes and out-of bounds addresses.
kStatus_FLASH_ProtectionViolation	The program/erase operation is requested to execute on protected areas.
kStatus_FLASH_CommandFailure	Run-time error during the command execution.

status_t FLASH_IsProtected	(	flash_config_t *	config,
		uint32_t	start,
		uint32_t	lengthInBytes,
		flash_protection_state_t *	protection_state
	)

This function retrieves the current flash protect status for a given flash area as determined by the start address and length.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be checked. Must be word-aligned.
lengthInBytes	The length, given in bytes (not words or long-words) to be checked. Must be word-aligned.
protection_state	A pointer to the value returned for the current protection status code for the desired flash area.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	Parameter is not aligned with specified baseline.
kStatus_FLASH_AddressError	The address is out of range.

status_t FLASH_IsExecuteOnly	(	flash_config_t *	config,
		uint32_t	start,
		uint32_t	lengthInBytes,
		flash_execute_only_access_state_t *	access_state
	)

This function retrieves the current flash access status for a given flash area as determined by the start address and length.

Parameters

config	A pointer to the storage for the driver runtime state.
start	The start address of the desired flash memory to be checked. Must be word-aligned.
lengthInBytes	The length, given in bytes (not words or long-words), to be checked. Must be word-aligned.
access_state	A pointer to the value returned for the current access status code for the desired flash area.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_AlignmentError	The parameter is not aligned to the specified baseline.
kStatus_FLASH_AddressError	The address is out of range.

status_t FLASH_GetProperty	(	flash_config_t *	config,
		flash_property_tag_t	whichProperty,
		uint32_t *	value
	)

Parameters

config	A pointer to the storage for the driver runtime state.
whichProperty	The desired property from the list of properties in enum flash_property_tag_t
value	A pointer to the value returned for the desired flash property.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_UnknownProperty	An unknown property tag.

status_t FLASH_SetProperty	(	flash_config_t *	config,
		flash_property_tag_t	whichProperty,
		uint32_t	value
	)

Parameters

config	A pointer to the storage for the driver runtime state.
whichProperty	The desired property from the list of properties in enum flash_property_tag_t
value	A to set for the desired flash property.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_UnknownProperty	An unknown property tag.
kStatus_FLASH_InvalidPropertyValue	An invalid property value.
kStatus_FLASH_ReadOnlyProperty	An read-only property tag.

status_t FLASH_PflashSetProtection	(	flash_config_t *	config,
		pflash_protection_status_t *	protectStatus
	)

Parameters

config A pointer to storage for the driver runtime state.

protectStatus The expected protect status to set to the PFlash protection register. Each bit is corresponding to protection of 1/32(64) of the total PFlash. The least significant bit is corresponding to the lowest address area of PFlash. The most significant bit is corresponding to the highest address area of PFlash. There are two possible cases as shown below: 0: this area is protected. 1: this area is unprotected.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.
kStatus_FLASH_CommandFailure	Run-time error during command execution.

status_t FLASH_PflashGetProtection	(	flash_config_t *	config,
		pflash_protection_status_t *	protectStatus
	)

Parameters

config	A pointer to the storage for the driver runtime state.
protectStatus	Protect status returned by the PFlash IP. Each bit is corresponding to the protection of 1/32(64) of the total PFlash. The least significant bit corresponds to the lowest address area of the PFlash. The most significant bit corresponds to the highest address area of PFlash. There are two possible cases as shown below: 0: this area is protected. 1: this area is unprotected.

Return values

kStatus_FLASH_Success	API was executed successfully.
kStatus_FLASH_InvalidArgument	An invalid argument is provided.

Overview

Data Structures

Typedefs

Enumerations

Flash version

Flash configuration

Flash status

Flash API key

Initialization

Erasing

Programming

Reading

Security

Verification

Protection

Properties

Flash Protection Utilities

Data Structure Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation