Macros
#define	FSL_SIM_SCGC_BIT(SCGCx, n) (((SCGCx-1U)<<5U) + n)
	SIM SCGC bit index. More...

Enumerations
enum	clock_wdog_src_k26f18_t { kClockWdogSrcLpoClk, kClockWdogSrcAltClk }
	WDOG clock source select. More...

enum	clock_trace_src_k26f18_t { kClockTraceSrcMcgoutClkDiv, kClockTraceSrcCoreClk }
	Debug trace clock source select. More...

enum	clock_port_filter_src_k26f18_t { kClockPortFilterSrcBusClk, kClockPortFilterSrcLpoClk }
	PORTx digital input filter clock source select. More...

enum	clock_tpm_src_k26f18_t { kClockTpmSrcNone, kClockTpmSrcPllFllSelDiv, kClockTpmSrcOsc0erClk, kClockTpmSrcMcgIrClk }
	TPM clock source select. More...

enum	clock_lptmr_src_k26f18_t { kClockLptmrSrcMcgIrClk, kClockLptmrSrcLpoClk, kClockLptmrSrcEr32kClk, kClockLptmrSrcOsc0erClkUndiv }
	LPTMR clock source select. More...

enum	clock_lpuart_src_k26f18_t { kClockLpuartSrcNone, kClockLpuartSrcPllFllSel, kClockLpuartSrcOsc0erClk, kClockLpuartSrcMcgIrClk }
	SIM LPUART clock source. More...

enum	sim_lpuart_rxsrc_k26f18_t { kSimLpuartRxsrcPin, kSimLpuartRxsrcCmp0, kSimLpuartRxsrcCmp1 }
	SIM LPUART RX source. More...

enum	sim_lpuart_txsrc_k26f18_t { kSimLpuartTxsrcPin, kSimLpuartTxsrcTpm1, kSimLpuartTxsrcTpm2 }
	SIM LPUART TX source. More...

enum	clock_usbfs_src_k26f18_t { kClockUsbfsSrcExt, kClockUsbfsSrcPllFllSel }
	SIM USB FS clock source. More...

enum	clock_flexcan_src_k26f18_t { kClockFlexcanSrcOsc0erClk, kClockFlexcanSrcBusClk }
	FLEXCAN clock source select. More...

enum	clock_sdhc_src_k26f18_t { kClockSdhcSrcCoreSysClk, kClockSdhcSrcPllFllSel, kClockSdhcSrcOsc0erClk, kClockSdhcSrcExt }
	SDHC clock source. More...

enum	clock_sai_src_k26f18_t { kClockSaiSrcSysClk = 0U, kClockSaiSrcOsc0erClk = 1U, kClockSaiSrcPllFllSel = 3U }
	SAI clock source. More...

enum	clock_pllfll_sel_k26f18_t { kClockPllFllSelFll = 0U, kClockPllFllSelPll = 1U, kClockPllFllSelUsb1pfd = 2U, kClockPllFllSelIrc48M = 3U }
	SIM PLLFLLSEL clock source select. More...

enum	clock_er32k_src_k26f18_t { kClockEr32kSrcOsc0 = 0U, kClockEr32kSrcRtc = 2U, kClockEr32kSrcLpo = 3U }
	SIM external reference clock source select (OSC32KSEL). More...

enum	clock_clkout_src_k26f18_t { kClockClkoutSelFlexbusClk = 0U, kClockClkoutSelFlashClk = 2U, kClockClkoutSelLpoClk = 3U, kClockClkoutSelMcgIrClk = 4U, kClockClkoutSelRtc = 5U, kClockClkoutSelOsc0erClk = 6U, kClockClkoutSelIrc48M = 7U }
	SIM CLKOUT_SEL clock source select. More...

enum	clock_rtcout_src_k26f18_t { kClockRtcoutSrc1Hz, kClockRtcoutSrc32kHz }
	SIM RTCCLKOUTSEL clock source select. More...

enum	clock_usbhs_slowclk_src_k26f18_t { kClockUsbhsSlowClkSrcMcgIrClk, kClockUsbhsSlowClkSrcRtc32kHz }
	SIM USBHS/USBPHY slow clock source select. More...

enum	sim_usbsstby_mode_k26f18_t { kSimUsbsstbyNoRegulator, kSimUsbsstbyWithRegulator }
	SIM USB voltage regulator in standby mode setting during stop modes. More...

enum	sim_usbvstby_mode_k26f18_t { kSimUsbvstbyNoRegulator, kSimUsbvstbyWithRegulator }
	SIM USB voltage regulator in standby mode setting during VLPR and VLPW modes. More...

enum	sim_usbvout_mode_k26f18_t { kSimUsbvout2_733V, kSimUsbvout3_020V, kSimUsbvout3_074V, kSimUsbvout3_130V, kSimUsbvout3_188V, kSimUsbvout3_248V, kSimUsbvout3_310V }
	SIM USB voltage regulator 3.3 output target. More...

enum	sim_adc_pretrg_sel_k26f18_t { kSimAdcPretrgselA, kSimAdcPretrgselB }
	SIM ADCx pre-trigger select. More...

enum	sim_adc_trg_sel_k26f18_t { kSimAdcTrgselExt = 0U, kSimAdcTrgSelHighSpeedComp0 = 1U, kSimAdcTrgSelHighSpeedComp1 = 2U, kSimAdcTrgSelHighSpeedComp2 = 3U, kSimAdcTrgSelPit0 = 4U, kSimAdcTrgSelPit1 = 5U, kSimAdcTrgSelPit2 = 6U, kSimAdcTrgSelPit3 = 7U, kSimAdcTrgSelFtm0 = 8U, kSimAdcTrgSelFtm1 = 9U, kSimAdcTrgSelFtm2 = 10U, kSimAdcTrgSelFtm3 = 11U, kSimAdcTrgSelRtcAlarm = 12U, kSimAdcTrgSelRtcSec = 13U, kSimAdcTrgSelLptimer = 14U, kSimAdcTrgSelTpm = 15U }
	SIM ADCx trigger select. More...

enum	sim_uart_rxsrc_k26f18_t { kSimUartRxsrcPin, kSimUartRxsrcCmp0, kSimUartRxsrcCmp1 }
	SIM UART receive data source select. More...

enum	sim_uart_txsrc_k26f18_t { kSimUartTxsrcPin, kSimUartTxsrcFtm1, kSimUartTxsrcFtm2 }
	SIM UART transmit data source select. More...

enum	sim_ftm_trg_src_k26f18_t { kSimFtmTrgSrc0, kSimFtmTrgSrc1 }
	SIM FlexTimer x trigger y select. More...

enum	sim_ftm_clk_sel_k26f18_t { kSimFtmClkSel0, kSimFtmClkSel1 }
	SIM FlexTimer external clock select. More...

enum	sim_ftm_ch_src_k26f18_t { kSimFtmChSrc0, kSimFtmChSrc1, kSimFtmChSrc2, kSimFtmChSrc3 }
	SIM FlexTimer x channel y input capture source select. More...

enum	sim_ftm_ch_out_src_k26f18_t { kSimFtmChOutSrc0, kSimFtmChOutSrc1 }
	SIM FlexTimer x channel y output source select. More...

enum	sim_ftm_flt_sel_k26f18_t { kSimFtmFltSel0, kSimFtmFltSel1 }
	SIM FlexTimer x Fault y select. More...

enum	sim_tpm_clk_sel_k26f18_t { kSimTpmClkSel0, kSimTpmClkSel1 }
	SIM Timer/PWM external clock select. More...

enum	sim_tpm_ch_src_k26f18_t { kSimTpmChSrc0, kSimTpmChSrc1, kSimTpmChSrc2, kSimTpmChSrc3 }
	SIM Timer/PWM x channel y input capture source select. More...

enum	sim_cmtuartpad_strengh_k26f18_t { kSimCmtuartSinglePad, kSimCmtuartDualPad }
	SIM CMT/UART pad drive strength. More...

enum	sim_ptd7pad_strengh_k26f18_t { kSimPtd7padSinglePad, kSimPtd7padDualPad }
	SIM PTD7 pad drive strength. More...

enum	sim_flexbus_security_level_k26f18_t { kSimFbslLevel0, kSimFbslLevel1, kSimFbslLevel2, kSimFbslLevel3 }
	SIM FlexBus security level. More...

enum	sim_clock_gate_name_k26f18_t { kSimClockGateI2c2 = FSL_SIM_SCGC_BIT(1U, 6U), kSimClockGateI2c3 = FSL_SIM_SCGC_BIT(1U, 7U), kSimClockGateUart4 = FSL_SIM_SCGC_BIT(1U, 10U), kSimClockGateLpuart0 = FSL_SIM_SCGC_BIT(2U, 4U), kSimClockGateTpm1 = FSL_SIM_SCGC_BIT(2U, 9U), kSimClockGateTpm2 = FSL_SIM_SCGC_BIT(2U, 10U), kSimClockGateDac0 = FSL_SIM_SCGC_BIT(2U, 12U), kSimClockGateDac1 = FSL_SIM_SCGC_BIT(2U, 13U), kSimClockGateRnga0 = FSL_SIM_SCGC_BIT(3U, 0U), kSimClockGateUsbhs0 = FSL_SIM_SCGC_BIT(3U, 1U), kSimClockGateUsbhsphy0 = FSL_SIM_SCGC_BIT(3U, 2U), kSimClockGateUsbhsdcd0 = FSL_SIM_SCGC_BIT(3U, 3U), kSimClockGateFlexcan1 = FSL_SIM_SCGC_BIT(3U, 4U), kSimClockGateSpi2 = FSL_SIM_SCGC_BIT(3U, 12U), kSimClockGateSdhc0 = FSL_SIM_SCGC_BIT(3U, 17U), kSimClockGateFtm3 = FSL_SIM_SCGC_BIT(3U, 25U), kSimClockGateAdc1 = FSL_SIM_SCGC_BIT(3U, 27U), kSimClockGateEwm0 = FSL_SIM_SCGC_BIT(4U, 1U), kSimClockGateCmt0 = FSL_SIM_SCGC_BIT(4U, 2U), kSimClockGateI2c0 = FSL_SIM_SCGC_BIT(4U, 6U), kSimClockGateI2c1 = FSL_SIM_SCGC_BIT(4U, 7U), kSimClockGateUart0 = FSL_SIM_SCGC_BIT(4U, 10U), kSimClockGateUart1 = FSL_SIM_SCGC_BIT(4U, 11U), kSimClockGateUart2 = FSL_SIM_SCGC_BIT(4U, 12U), kSimClockGateUart3 = FSL_SIM_SCGC_BIT(4U, 13U), kSimClockGateUsbfs0 = FSL_SIM_SCGC_BIT(4U, 18U), kSimClockGateCmp = FSL_SIM_SCGC_BIT(4U, 19U), kSimClockGateVref0 = FSL_SIM_SCGC_BIT(4U, 20U), kSimClockGateLptmr0 = FSL_SIM_SCGC_BIT(5U, 0U), kSimClockGateTsi0 = FSL_SIM_SCGC_BIT(5U, 5U), kSimClockGatePortA = FSL_SIM_SCGC_BIT(5U, 9U), kSimClockGatePortB = FSL_SIM_SCGC_BIT(5U, 10U), kSimClockGatePortC = FSL_SIM_SCGC_BIT(5U, 11U), kSimClockGatePortD = FSL_SIM_SCGC_BIT(5U, 12U), kSimClockGatePortE = FSL_SIM_SCGC_BIT(5U, 13U), kSimClockGateFtf0 = FSL_SIM_SCGC_BIT(6U, 0U), kSimClockGateDmamux0 = FSL_SIM_SCGC_BIT(6U, 1U), kSimClockGateFlexcan0 = FSL_SIM_SCGC_BIT(6U, 4U), kSimClockGateSpi0 = FSL_SIM_SCGC_BIT(6U, 12U), kSimClockGateSpi1 = FSL_SIM_SCGC_BIT(6U, 13U), kSimClockGateSai0 = FSL_SIM_SCGC_BIT(6U, 15U), kSimClockGateCrc0 = FSL_SIM_SCGC_BIT(6U, 18U), kSimClockGateUsbdcd0 = FSL_SIM_SCGC_BIT(6U, 21U), kSimClockGatePdb0 = FSL_SIM_SCGC_BIT(6U, 22U), kSimClockGatePit0 = FSL_SIM_SCGC_BIT(6U, 23U), kSimClockGateFtm0 = FSL_SIM_SCGC_BIT(6U, 24U), kSimClockGateFtm1 = FSL_SIM_SCGC_BIT(6U, 25U), kSimClockGateFtm2 = FSL_SIM_SCGC_BIT(6U, 26U), kSimClockGateAdc0 = FSL_SIM_SCGC_BIT(6U, 27U), kSimClockGateRtc0 = FSL_SIM_SCGC_BIT(6U, 29U), kSimClockGateFlexbus0 = FSL_SIM_SCGC_BIT(7U, 0U), kSimClockGateDma0 = FSL_SIM_SCGC_BIT(7U, 1U), kSimClockGateMpu0 = FSL_SIM_SCGC_BIT(7U, 2U), kSimClockGateSdramc0 = FSL_SIM_SCGC_BIT(7U, 3U) }
	Clock gate name used for SIM_HAL_EnableClock/SIM_HAL_DisableClock. More...

Functions
static void	SIM_HAL_EnableClock (SIM_Type *base, sim_clock_gate_name_t name)
	Enable the clock for specific module. More...

static void	SIM_HAL_DisableClock (SIM_Type *base, sim_clock_gate_name_t name)
	Disable the clock for specific module. More...

static bool	SIM_HAL_GetGateCmd (SIM_Type *base, sim_clock_gate_name_t name)
	Get the the clock gate state for specific module. More...

static void	CLOCK_HAL_SetLpuartSrc (SIM_Type *base, uint32_t instance, clock_lpuart_src_t setting)
	Set LPUART clock source. More...

static clock_lpuart_src_t	CLOCK_HAL_GetLpuartSrc (SIM_Type *base, uint32_t instance)
	Get LPUART clock source. More...

static void	CLOCK_HAL_SetSdhcSrc (SIM_Type *base, uint32_t instance, clock_sdhc_src_t setting)
	Set the SDHC clock source selection. More...

static clock_sdhc_src_t	CLOCK_HAL_GetSdhcSrc (SIM_Type *base, uint32_t instance)
	Get the SDHC clock source selection. More...

static void	CLOCK_HAL_SetUsbfsSrc (SIM_Type *base, uint32_t instance, clock_usbfs_src_t setting)
	Set the selection of the clock source for the USB FS 48 MHz clock. More...

static clock_usbfs_src_t	CLOCK_HAL_GetUsbfsSrc (SIM_Type *base, uint32_t instance)
	Get the selection of the clock source for the USB FS 48 MHz clock. More...

void	CLOCK_HAL_SetUsbfsDiv (SIM_Type *base, uint8_t usbdiv, uint8_t usbfrac)
	Set USB FS divider setting. More...

void	CLOCK_HAL_GetUsbfsDiv (SIM_Type base, uint8_t usbdiv, uint8_t *usbfrac)
	Get USB FS divider setting. More...

static void	CLOCK_HAL_SetUsbhsSlowClockSrc (SIM_Type *base, uint32_t instance, clock_usbhs_slowclk_src_t setting)
	Set the selection of the clock source for the USB HS/USB PHY slow clock. More...

static clock_usbhs_slowclk_src_t	CLOCK_HAL_GetUsbhsSlowClockSrc (SIM_Type *base, uint32_t instance)
	Get the selection of the clock source for the USB HS/USB PHY slow clock. More...

void	CLOCK_HAL_SetPllFllDiv (SIM_Type *base, uint8_t pllflldiv, uint8_t pllfllfrac)
	Set PLL/FLL divider setting. More...

void	CLOCK_HAL_GetPllFllDiv (SIM_Type base, uint8_t pllflldiv, uint8_t *pllfllfrac)
	Gets PLL/FLL divider setting. More...

static void	CLOCK_HAL_SetTraceClkSrc (SIM_Type *base, clock_trace_src_t setting)
	Set debug trace clock selection. More...

static clock_trace_src_t	CLOCK_HAL_GetTraceClkSrc (SIM_Type *base)
	Get debug trace clock selection. More...

void	CLOCK_HAL_SetTraceDiv (SIM_Type *base, uint8_t tracediv, uint8_t tracefrac)
	Set TRACECLK divider setting. More...

void	CLOCK_HAL_GetTraceDiv (SIM_Type base, uint8_t tracediv, uint8_t *tracefrac)
	Gets TRACECLK setting. More...

static void	CLOCK_HAL_SetTpmSrc (SIM_Type *base, uint32_t instance, clock_tpm_src_t setting)
	Set the TPM clock source selection. More...

static clock_tpm_src_t	CLOCK_HAL_GetTpmSrc (SIM_Type *base, uint32_t instance)
	Get the TPM clock source selection. More...

static void	CLOCK_HAL_SetExternalRefClock32kSrc (SIM_Type *base, clock_er32k_src_t setting)
	Set the clock selection of ERCLK32K. More...

static clock_er32k_src_t	CLOCK_HAL_GetExternalRefClock32kSrc (SIM_Type *base)
	Get the clock selection of ERCLK32K. More...

static void	CLOCK_HAL_SetPllfllSel (SIM_Type *base, clock_pllfll_sel_t setting)
	Set PLL/FLL clock selection. More...

static clock_pllfll_sel_t	CLOCK_HAL_GetPllfllSel (SIM_Type *base)
	Get PLL/FLL clock selection. More...

static void	CLOCK_HAL_SetClkOutSel (SIM_Type *base, clock_clkout_src_t setting)
	Set CLKOUTSEL selection. More...

static clock_clkout_src_t	CLOCK_HAL_GetClkOutSel (SIM_Type *base)
	Get CLKOUTSEL selection. More...

static void	CLOCK_HAL_SetRtcClkOutSel (SIM_Type *base, clock_rtcout_src_t setting)
	Set RTCCLKOUTSEL selection. More...

static clock_rtcout_src_t	CLOCK_HAL_GetRtcClkOutSel (SIM_Type *base)
	Get RTCCLKOUTSEL selection. More...

static void	CLOCK_HAL_SetOutDiv1 (SIM_Type *base, uint8_t setting)
	Set OUTDIV1. More...

static uint8_t	CLOCK_HAL_GetOutDiv1 (SIM_Type *base)
	Get OUTDIV1. More...

static void	CLOCK_HAL_SetOutDiv2 (SIM_Type *base, uint8_t setting)
	Set OUTDIV2. More...

static uint8_t	CLOCK_HAL_GetOutDiv2 (SIM_Type *base)
	Get OUTDIV2. More...

static void	CLOCK_HAL_SetOutDiv3 (SIM_Type *base, uint8_t setting)
	Set OUTDIV3. More...

static uint8_t	CLOCK_HAL_GetOutDiv3 (SIM_Type *base)
	Get OUTDIV3. More...

static void	CLOCK_HAL_SetOutDiv4 (SIM_Type *base, uint8_t setting)
	Set OUTDIV4. More...

static uint8_t	CLOCK_HAL_GetOutDiv4 (SIM_Type *base)
	Get OUTDIV4. More...

static uint32_t	SIM_HAL_GetRamSize (SIM_Type *base)
	Gets RAM size. More...

static void	SIM_HAL_SetUsbVoltRegulatorCmd (SIM_Type *base, bool enable)
	Sets the USB voltage regulator enabled setting. More...

static bool	SIM_HAL_GetUsbVoltRegulatorCmd (SIM_Type *base)
	Gets the USB voltage regulator enabled setting. More...

static void	SIM_HAL_SetUsbVoltRegulatorInStdbyDuringStopMode (SIM_Type *base, sim_usbsstby_mode_t setting)
	Sets the USB voltage regulator in a standby mode setting during Stop, VLPS, LLS, and VLLS. More...

static sim_usbsstby_mode_t	SIM_HAL_GetUsbVoltRegulatorInStdbyDuringStopMode (SIM_Type *base)
	Gets the USB voltage regulator in a standby mode setting. More...

static void	SIM_HAL_SetUsbVoltRegulatorInStdbyDuringVlprwMode (SIM_Type *base, sim_usbvstby_mode_t setting)
	Sets the USB voltage regulator in a standby mode during the VLPR or the VLPW. More...

static sim_usbvstby_mode_t	SIM_HAL_GetUsbVoltRegulatorInStdbyDuringVlprwMode (SIM_Type *base)
	Gets the USB voltage regulator in a standby mode during the VLPR or the VLPW. More...

static void	SIM_HAL_SetUsbVoltRegulatorInStdbyDuringStopCmd (SIM_Type *base, bool enable)
	Sets the USB voltage regulator stop standby write enable setting. More...

static bool	SIM_HAL_GetUsbVoltRegulatorInStdbyDuringStopCmd (SIM_Type *base)
	Gets the USB voltage regulator stop standby write enable setting. More...

static void	SIM_HAL_SetUsbVoltRegulatorInStdbyDuringVlprwCmd (SIM_Type *base, bool enable)
	Sets the USB voltage regulator VLP standby write enable setting. More...

static bool	SIM_HAL_GetUsbVoltRegulatorInStdbyDuringVlprwCmd (SIM_Type *base)
	Gets the USB voltage regulator VLP standby write enable setting. More...

static void	SIM_HAL_SetUsbVoltRegulatorWriteCmd (SIM_Type *base, bool enable)
	Sets the USB voltage regulator enable write enable setting. More...

static bool	SIM_HAL_GetUsbVoltRegulatorWriteCmd (SIM_Type *base)
	Gets the USB voltage regulator enable write enable setting. More...

static void	SIM_HAL_SetUsbVoltRegulatorInrushLimitCmd (SIM_Type *base, bool enable)
	Sets the USB voltage regulator inrush current limit setting. More...

static bool	SIM_HAL_GetUsbVoltRegulatorInrushLimitCmd (SIM_Type *base)
	Gets the USB voltage regulator inrush current limit setting. More...

static void	SIM_HAL_SetUsbVoltRegulatorOutputTargetCmd (SIM_Type *base, sim_usbvout_mode_t target)
	Sets the USB voltage regulator output target. More...

static sim_usbvout_mode_t	SIM_HAL_GetUsbVoltRegulatorOutputTargetCmd (SIM_Type *base)
	Gets the USB voltage regulator output target. More...

static void	SIM_HAL_SetUsbPhyPllRegulatorCmd (SIM_Type *base, bool enable)
	Sets the USB PHY PLL regulator enabled setting. More...

static bool	SIM_HAL_GetUsbPhyPllRegulatorCmd (SIM_Type *base)
	Gets the USB PHY PLL regulator enabled setting. More...

static void	SIM_HAL_SetFlexbusSecurityLevelMode (SIM_Type *base, sim_flexbus_security_level_t setting)
	Sets the FlexBus security level setting. More...

static sim_flexbus_security_level_t	SIM_HAL_GetFlexbusSecurityLevelMode (SIM_Type *base)
	Gets the FlexBus security level setting. More...

static void	SIM_HAL_SetLpuartRxSrcMode (SIM_Type *base, uint32_t instance, sim_lpuart_rxsrc_t select)
	Sets the LPUARTx receive data source select setting. More...

static sim_lpuart_rxsrc_t	SIM_HAL_GetLpuartRxSrcMode (SIM_Type *base, uint32_t instance)
	Gets the LPUARTx receive data source select setting. More...

static void	SIM_HAL_SetLpuartTxSrcMode (SIM_Type *base, uint32_t instance, sim_lpuart_txsrc_t select)
	Sets the LPUARTx transmit data source select setting. More...

static sim_lpuart_rxsrc_t	SIM_HAL_GetLpuartTxSrcMode (SIM_Type *base, uint32_t instance)
	Gets the LPUARTx transmit data source select setting. More...

void	SIM_HAL_SetFtmTriggerSrcMode (SIM_Type *base, uint32_t instance, uint8_t trigger, sim_ftm_trg_src_t select)
	Sets the FlexTimer x hardware trigger y source select setting. More...

sim_ftm_trg_src_t	SIM_HAL_GetFtmTriggerSrcMode (SIM_Type *base, uint32_t instance, uint8_t trigger)
	Gets the FlexTimer x hardware trigger y source select setting. More...

void	SIM_HAL_SetFtmExternalClkPinMode (SIM_Type *base, uint32_t instance, sim_ftm_clk_sel_t select)
	Sets the FlexTimer x external clock pin select setting. More...

sim_ftm_clk_sel_t	SIM_HAL_GetFtmExternalClkPinMode (SIM_Type *base, uint32_t instance)
	Gets the FlexTimer x external clock pin select setting. More...

void	SIM_HAL_SetFtmChSrcMode (SIM_Type *base, uint32_t instance, uint8_t channel, sim_ftm_ch_src_t select)
	Sets the FlexTimer x channel y input capture source select setting. More...

sim_ftm_ch_src_t	SIM_HAL_GetFtmChSrcMode (SIM_Type *base, uint32_t instance, uint8_t channel)
	Gets the FlexTimer x channel y input capture source select setting. More...

void	SIM_HAL_SetFtmChOutSrcMode (SIM_Type *base, uint32_t instance, uint8_t channel, sim_ftm_ch_out_src_t select)
	Sets the FlexTimer x channel y output source select setting. More...

sim_ftm_ch_out_src_t	SIM_HAL_GetFtmChOutSrcMode (SIM_Type *base, uint32_t instance, uint8_t channel)
	Gets the FlexTimer x channel y output source select setting. More...

void	SIM_HAL_SetFtmSyncCmd (SIM_Type *base, uint32_t instance, bool sync)
	Set FlexTimer x hardware trigger 0 software synchronization. More...

static bool	SIM_HAL_GetFtmSyncCmd (SIM_Type *base, uint32_t instance)
	Get FlexTimer x hardware trigger 0 software synchronization setting. More...

void	SIM_HAL_SetFtmFaultSelMode (SIM_Type *base, uint32_t instance, uint8_t fault, sim_ftm_flt_sel_t select)
	Sets the FlexTimer x fault y select setting. More...

sim_ftm_flt_sel_t	SIM_HAL_GetFtmFaultSelMode (SIM_Type *base, uint32_t instance, uint8_t fault)
	Gets the FlexTimer x fault y select setting. More...

static uint32_t	SIM_HAL_GetFamilyId (SIM_Type *base)
	Gets the Kinetis Family ID in the System Device ID register (SIM_SDID). More...

static uint32_t	SIM_HAL_GetSubFamilyId (SIM_Type *base)
	Gets the Kinetis Sub-Family ID in the System Device ID register (SIM_SDID). More...

static uint32_t	SIM_HAL_GetSeriesId (SIM_Type *base)
	Gets the Kinetis SeriesID in the System Device ID register (SIM_SDID). More...

static uint32_t	SIM_HAL_GetFamId (SIM_Type *base)
	Gets the Kinetis Fam ID in System Device ID register (SIM_SDID). More...

static uint32_t	SIM_HAL_GetPinCntId (SIM_Type *base)
	Gets the Kinetis Pincount ID in System Device ID register (SIM_SDID). More...

static uint32_t	SIM_HAL_GetRevId (SIM_Type *base)
	Gets the Kinetis Revision ID in the System Device ID register (SIM_SDID). More...

static uint32_t	SIM_HAL_GetDieId (SIM_Type *base)
	Gets the Kinetis Die ID in the System Device ID register (SIM_SDID). More...

static uint32_t	SIM_HAL_GetFlexnvmSize (SIM_Type *base)
	Gets the FlexNVM size in the Flash Configuration Register 1 (SIM_FCFG). More...

static uint32_t	SIM_HAL_GetProgramFlashSize (SIM_Type *base)
	Gets the program flash size in the Flash Configuration Register 1 (SIM_FCFG). More...

static uint32_t	SIM_HAL_GetEepromSize (SIM_Type *base)
	Gets the EEProm size in the Flash Configuration Register 1 (SIM_FCFG). More...

static uint32_t	SIM_HAL_GetFlexnvmPartition (SIM_Type *base)
	Gets the FlexNVM partition in the Flash Configuration Register 1 (SIM_FCFG). More...

static void	SIM_HAL_SetFlashDoze (SIM_Type *base, uint32_t setting)
	Sets the Flash Doze in the Flash Configuration Register 1 (SIM_FCFG). More...

static uint32_t	SIM_HAL_GetFlashDoze (SIM_Type *base)
	Gets the Flash Doze in the Flash Configuration Register 1 (SIM_FCFG). More...

static void	SIM_HAL_SetFlashDisableCmd (SIM_Type *base, bool disable)
	Sets the Flash disable setting. More...

static bool	SIM_HAL_GetFlashDisableCmd (SIM_Type *base)
	Gets the Flash disable setting. More...

static uint32_t	SIM_HAL_GetFlashMaxAddrBlock0 (SIM_Type *base)
	Gets the Flash maximum address block 0 in the Flash Configuration Register 1 (SIM_FCFG). More...

static uint32_t	SIM_HAL_GetFlashMaxAddrBlock1 (SIM_Type *base)
	Gets the Flash maximum address block 1 in Flash Configuration Register 2. More...

static uint32_t	SIM_HAL_GetProgramFlashCmd (SIM_Type *base)
	Gets the program flash in the Flash Configuration Register 2. More...

static bool	SIM_HAL_GetSwapProgramFlash (SIM_Type *base)
	Gets the Swap program flash flag in the Flash Configuration Register 2. More...

IP related clock feature APIs
void	CLOCK_HAL_SetOutDiv (SIM_Type *base, uint8_t outdiv1, uint8_t outdiv2, uint8_t outdiv3, uint8_t outdiv4)
	Sets the clock out dividers setting. More...

void	CLOCK_HAL_GetOutDiv (SIM_Type base, uint8_t outdiv1, uint8_t outdiv2, uint8_t outdiv3, uint8_t *outdiv4)
	Gets the clock out dividers setting. More...

void	SIM_HAL_SetAdcAlternativeTriggerCmd (SIM_Type *base, uint32_t instance, bool enable)
	Sets the ADCx alternate trigger enable setting. More...

bool	SIM_HAL_GetAdcAlternativeTriggerCmd (SIM_Type *base, uint32_t instance)
	Gets the ADCx alternate trigger enable setting. More...

void	SIM_HAL_SetAdcPreTriggerMode (SIM_Type *base, uint32_t instance, sim_adc_pretrg_sel_t select)
	Sets the ADCx pre-trigger select setting. More...

sim_adc_pretrg_sel_t	SIM_HAL_GetAdcPreTriggerMode (SIM_Type *base, uint32_t instance)
	Gets the ADCx pre-trigger select setting. More...

void	SIM_HAL_SetAdcTriggerMode (SIM_Type *base, uint32_t instance, sim_adc_trg_sel_t select)
	Sets the ADCx trigger select setting. More...

sim_adc_trg_sel_t	SIM_HAL_GetAdcTriggerMode (SIM_Type *base, uint32_t instance)
	Gets the ADCx trigger select setting. More...

void	SIM_HAL_SetAdcTriggerModeOneStep (SIM_Type *base, uint32_t instance, bool altTrigEn, sim_adc_pretrg_sel_t preTrigSel, sim_adc_trg_sel_t trigSel)
	Sets the ADCx trigger select setting in one function. More...

void	SIM_HAL_SetUartRxSrcMode (SIM_Type *base, uint32_t instance, sim_uart_rxsrc_t select)
	Sets the UARTx receive data source select setting. More...

sim_uart_rxsrc_t	SIM_HAL_GetUartRxSrcMode (SIM_Type *base, uint32_t instance)
	Gets the UARTx receive data source select setting. More...

void	SIM_HAL_SetUartTxSrcMode (SIM_Type *base, uint32_t instance, sim_uart_txsrc_t select)
	Sets the UARTx transmit data source select setting. More...

sim_uart_txsrc_t	SIM_HAL_GetUartTxSrcMode (SIM_Type *base, uint32_t instance)
	Gets the UARTx transmit data source select setting. More...

Function Documentation

static void SIM_HAL_EnableClock	(	SIM_Type *	base,
		sim_clock_gate_name_t	name
	)

inlinestatic

This function enables the clock for specific module.

Parameters

base	Base address for current SIM instance.
name	Name of the module to enable.

static void SIM_HAL_DisableClock	(	SIM_Type *	base,
		sim_clock_gate_name_t	name
	)

inlinestatic

This function disables the clock for specific module.

Parameters

base	Base address for current SIM instance.
name	Name of the module to disable.

static bool SIM_HAL_GetGateCmd	(	SIM_Type *	base,
		sim_clock_gate_name_t	name
	)

inlinestatic

This function will get the clock gate state for specific module.

Parameters

base	Base address for current SIM instance.
name	Name of the module to get.

Returns: state true - ungated(Enabled), false - gated (Disabled)

static void CLOCK_HAL_SetLpuartSrc	(	SIM_Type *	base,
		uint32_t	instance,
		clock_lpuart_src_t	setting
	)

inlinestatic

This function sets lpuart clock source selection.

Parameters

base	Base address for current SIM instance.
instance	LPUART instance.
setting	The value to set.

static clock_lpuart_src_t CLOCK_HAL_GetLpuartSrc	(	SIM_Type *	base,
		uint32_t	instance
	)

inlinestatic

This function gets lpuart clock source selection.

Parameters

base	Base address for current SIM instance.
instance	LPUART instance.

Returns: Current selection.

static void CLOCK_HAL_SetSdhcSrc	(	SIM_Type *	base,
		uint32_t	instance,
		clock_sdhc_src_t	setting
	)

inlinestatic

This function sets the SDHC clock source selection.

Parameters

base	Base address for current SIM instance.
instance	IP instance.
setting	The value to set.

static clock_sdhc_src_t CLOCK_HAL_GetSdhcSrc	(	SIM_Type *	base,
		uint32_t	instance
	)

inlinestatic

This function gets the SDHC clock source selection.

Parameters

base	Base address for current SIM instance.
instance	IP instance.

Returns: Current selection.

static void CLOCK_HAL_SetUsbfsSrc	(	SIM_Type *	base,
		uint32_t	instance,
		clock_usbfs_src_t	setting
	)

inlinestatic

This function sets the selection of the clock source for the USB FS 48 MHz clock.

Parameters

base	Base address for current SIM instance.
instance	IP instance.
setting	The value to set.

static clock_usbfs_src_t CLOCK_HAL_GetUsbfsSrc	(	SIM_Type *	base,
		uint32_t	instance
	)

inlinestatic

This function gets the selection of the clock source for the USB FS 48 MHz clock.

Parameters

base	Base address for current SIM instance.
instance	IP instance.

Returns: Current selection.

static void CLOCK_HAL_SetTraceClkSrc	(	SIM_Type *	base,
		clock_trace_src_t	setting
	)

inlinestatic

This function sets debug trace clock selection.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_trace_src_t CLOCK_HAL_GetTraceClkSrc ( SIM_Type * base )

inlinestatic

This function gets debug trace clock selection.

Parameters

base	Base address for current SIM instance.

Returns: Current selection.

static void CLOCK_HAL_SetExternalRefClock32kSrc	(	SIM_Type *	base,
		clock_er32k_src_t	setting
	)

inlinestatic

This function sets the clock selection of ERCLK32K.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_er32k_src_t CLOCK_HAL_GetExternalRefClock32kSrc ( SIM_Type * base )

inlinestatic

This function gets the clock selection of ERCLK32K.

Parameters

base	Base address for current SIM instance.

Returns: Current selection.

static void CLOCK_HAL_SetPllfllSel	(	SIM_Type *	base,
		clock_pllfll_sel_t	setting
	)

inlinestatic

This function sets the selection of the high frequency clock for various peripheral clocking options

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_pllfll_sel_t CLOCK_HAL_GetPllfllSel ( SIM_Type * base )

inlinestatic

This function gets the selection of the high frequency clock for various peripheral clocking options

Parameters

base	Base address for current SIM instance.

Returns: Current selection.

static void CLOCK_HAL_SetClkOutSel	(	SIM_Type *	base,
		clock_clkout_src_t	setting
	)

inlinestatic

This function sets the selection of the clock to output on the CLKOUT pin.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_clkout_src_t CLOCK_HAL_GetClkOutSel ( SIM_Type * base )

inlinestatic

This function gets the selection of the clock to output on the CLKOUT pin.

Parameters

base	Base address for current SIM instance.

Returns: Current selection.

static void CLOCK_HAL_SetRtcClkOutSel	(	SIM_Type *	base,
		clock_rtcout_src_t	setting
	)

inlinestatic

This function sets the selection of the clock to output on the RTC_CLKOUT pin.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_rtcout_src_t CLOCK_HAL_GetRtcClkOutSel ( SIM_Type * base )

inlinestatic

This function gets the selection of the clock to output on the RTC_CLKOUT pin.

Parameters

base	Base address for current SIM instance.

Returns: Current selection.

static void CLOCK_HAL_SetOutDiv1	(	SIM_Type *	base,
		uint8_t	setting
	)

inlinestatic

This function sets divide value OUTDIV1.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static uint8_t CLOCK_HAL_GetOutDiv1 ( SIM_Type * base )

inlinestatic

This function gets divide value OUTDIV1.

Parameters

base	Base address for current SIM instance.

Returns: Current divide value.

static void CLOCK_HAL_SetOutDiv2	(	SIM_Type *	base,
		uint8_t	setting
	)

inlinestatic

This function sets divide value OUTDIV2.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static uint8_t CLOCK_HAL_GetOutDiv2 ( SIM_Type * base )

inlinestatic

This function gets divide value OUTDIV2.

Parameters

base	Base address for current SIM instance.

Returns: Current divide value.

static void CLOCK_HAL_SetOutDiv3	(	SIM_Type *	base,
		uint8_t	setting
	)

inlinestatic

This function sets divide value OUTDIV3.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static uint8_t CLOCK_HAL_GetOutDiv3 ( SIM_Type * base )

inlinestatic

This function gets divide value OUTDIV3.

Parameters

base	Base address for current SIM instance.

Returns: Current divide value.

static void CLOCK_HAL_SetOutDiv4	(	SIM_Type *	base,
		uint8_t	setting
	)

inlinestatic

This function sets divide value OUTDIV4.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static uint8_t CLOCK_HAL_GetOutDiv4 ( SIM_Type * base )

inlinestatic

This function gets divide value OUTDIV4.

Parameters

base	Base address for current SIM instance.

Returns: Current divide value.

static uint32_t SIM_HAL_GetRamSize ( SIM_Type * base )

inlinestatic

This function gets the RAM size. The field specifies the amount of system RAM available on the device.

Parameters

base	Base address for current SIM instance.

Returns: size RAM size on the device

static void SIM_HAL_SetUsbVoltRegulatorCmd	(	SIM_Type *	base,
		bool	enable
	)

inlinestatic

This function controls whether the USB voltage regulator is enabled. This bit can only be written when the SOPT1CFG[URWE] bit is set.

Parameters

base	Base address for current SIM instance.
enable	USB voltage regulator enable setting true: USB voltage regulator is enabled. false: USB voltage regulator is disabled.

static bool SIM_HAL_GetUsbVoltRegulatorCmd ( SIM_Type * base )

inlinestatic

This function gets the USB voltage regulator enabled setting.

Parameters

base	Base address for current SIM instance.

Returns: enabled True if the USB voltage regulator is enabled.

static void SIM_HAL_SetUsbVoltRegulatorInStdbyDuringStopMode	(	SIM_Type *	base,
		sim_usbsstby_mode_t	setting
	)

inlinestatic

This function controls whether the USB voltage regulator is placed in a standby mode during Stop, VLPS, LLS, and VLLS modes. This bit can only be written when the SOPT1CFG[USSWE] bit is set.

Parameters

base	Base address for current SIM instance.
setting	USB voltage regulator in standby mode setting 0: USB voltage regulator not in standby during Stop, VLPS, LLS and VLLS modes. 1: USB voltage regulator in standby during Stop, VLPS, LLS and VLLS modes.

static sim_usbsstby_mode_t SIM_HAL_GetUsbVoltRegulatorInStdbyDuringStopMode ( SIM_Type * base )

inlinestatic

This function gets the USB voltage regulator in a standby mode setting.

Parameters

base	Base address for current SIM instance.

Returns: setting USB voltage regulator in a standby mode setting

static void SIM_HAL_SetUsbVoltRegulatorInStdbyDuringVlprwMode	(	SIM_Type *	base,
		sim_usbvstby_mode_t	setting
	)

inlinestatic

This function controls whether the USB voltage regulator is placed in a standby mode during the VLPR and the VLPW modes. This bit can only be written when the SOPT1CFG[UVSWE] bit is set.

Parameters

base	Base address for current SIM instance.
setting	USB voltage regulator in standby mode setting 0: USB voltage regulator not in standby during VLPR and VLPW modes. 1: USB voltage regulator in standby during VLPR and VLPW modes.

static sim_usbvstby_mode_t SIM_HAL_GetUsbVoltRegulatorInStdbyDuringVlprwMode ( SIM_Type * base )

inlinestatic

This function gets the USB voltage regulator in a standby mode during the VLPR or the VLPW.

Parameters

base	Base address for current SIM instance.

Returns: setting USB voltage regulator in a standby mode during the VLPR or the VLPW

static void SIM_HAL_SetUsbVoltRegulatorInStdbyDuringStopCmd	(	SIM_Type *	base,
		bool	enable
	)

inlinestatic

This function controls whether the USB voltage regulator stop standby write feature is enabled. Writing one to this bit allows the SOPT1[USBSSTBY] bit to be written. This register bit clears after a write to SOPT1[USBSSTBY].

Parameters

base	Base address for current SIM instance.
enable	USB voltage regulator stop standby write enable setting true: SOPT1[USBSSTBY] can be written. false: SOPT1[USBSSTBY] cannot be written.

static bool SIM_HAL_GetUsbVoltRegulatorInStdbyDuringStopCmd ( SIM_Type * base )

inlinestatic

This function gets the USB voltage regulator stop standby write enable setting.

Parameters

base	Base address for current SIM instance.

Returns: enabled True if the USB voltage regulator stop standby write is enabled.

static void SIM_HAL_SetUsbVoltRegulatorInStdbyDuringVlprwCmd	(	SIM_Type *	base,
		bool	enable
	)

inlinestatic

This function controls whether USB voltage regulator VLP standby write feature is enabled. Writing one to this bit allows the SOPT1[USBVSTBY] bit to be written. This register bit clears after a write to SOPT1[USBVSTBY].

Parameters

base	Base address for current SIM instance.
enable	USB voltage regulator VLP standby write enable setting true: SOPT1[USBSSTBY] can be written. false: SOPT1[USBSSTBY] cannot be written.

static bool SIM_HAL_GetUsbVoltRegulatorInStdbyDuringVlprwCmd ( SIM_Type * base )

inlinestatic

This function gets the USB voltage regulator VLP standby write enable setting.

Parameters

base	Base address for current SIM instance.

Returns: enabled True if the USB voltage regulator VLP standby write is enabled.

static void SIM_HAL_SetUsbVoltRegulatorWriteCmd	(	SIM_Type *	base,
		bool	enable
	)

inlinestatic

This function controls whether the USB voltage regulator write enable feature is enabled. Writing one to this bit allows the SOPT1[USBREGEN] bit to be written. This register bit clears after a write to SOPT1[USBREGEN].

Parameters

base	Base address for current SIM instance.
enable	USB voltage regulator enable write enable setting true: SOPT1[USBSSTBY] can be written. false: SOPT1[USBSSTBY] cannot be written.

static bool SIM_HAL_GetUsbVoltRegulatorWriteCmd ( SIM_Type * base )

inlinestatic

This function gets the USB voltage regulator enable write enable setting.

Parameters

base	Base address for current SIM instance.

Returns: enabled True if USB voltage regulator enable write is enabled.

static void SIM_HAL_SetFlexbusSecurityLevelMode	(	SIM_Type *	base,
		sim_flexbus_security_level_t	setting
	)

inlinestatic

This function sets the FlexBus security level setting. If the security is enabled, this field affects which CPU operations can access the off-chip via the FlexBus and DDR controller interfaces. This field has no effect if the security is not enabled.

Parameters

base	Base address for current SIM instance.
setting	FlexBus security level setting 00: All off-chip accesses (op code and data) via the FlexBus and DDR controller are disallowed. 10: Off-chip op code accesses are disallowed. Data accesses are allowed. 11: Off-chip op code accesses and data accesses are allowed.

static sim_flexbus_security_level_t SIM_HAL_GetFlexbusSecurityLevelMode ( SIM_Type * base )

inlinestatic

This function gets the FlexBus security level setting.

Parameters

base	Base address for current SIM instance.

Returns: setting FlexBus security level setting

static void SIM_HAL_SetLpuartRxSrcMode	(	SIM_Type *	base,
		uint32_t	instance,
		sim_lpuart_rxsrc_t	select
	)

inlinestatic

This function selects the source for the LPUARTx receive data.

Parameters

base	Base address for current SIM instance.
instance	device instance.
select	the source for the LPUARTx receive data

static sim_lpuart_rxsrc_t SIM_HAL_GetLpuartRxSrcMode	(	SIM_Type *	base,
		uint32_t	instance
	)

inlinestatic

This function gets the LPUARTx receive data source select setting.

Parameters

base	Base address for current SIM instance.
instance	device instance.

Returns: select LPUARTx receive data source select setting

static bool SIM_HAL_GetFtmSyncCmd	(	SIM_Type *	base,
		uint32_t	instance
	)

inlinestatic

This function gets FlexTimer x hardware trigger 0 software synchronization. FTMxSYNCBIT.

Parameters

base	Base address for current SIM instance.
instance	device instance.

Returns: The synchronization value.

static uint32_t SIM_HAL_GetFamilyId ( SIM_Type * base )

inlinestatic

This function gets the Kinetis Family ID in the System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns: id Kinetis Family ID

static uint32_t SIM_HAL_GetSubFamilyId ( SIM_Type * base )

inlinestatic

This function gets the Kinetis Sub-Family ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns: id Kinetis Sub-Family ID

static uint32_t SIM_HAL_GetSeriesId ( SIM_Type * base )

inlinestatic

This function gets the Kinetis Series ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns: id Kinetis Series ID

static uint32_t SIM_HAL_GetFamId ( SIM_Type * base )

inlinestatic

This function gets the Kinetis Fam ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns: id Kinetis Fam ID

static uint32_t SIM_HAL_GetPinCntId ( SIM_Type * base )

inlinestatic

This function gets the Kinetis Pincount ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns: id Kinetis Pincount ID

static uint32_t SIM_HAL_GetRevId ( SIM_Type * base )

inlinestatic

This function gets the Kinetis Revision ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns: id Kinetis Revision ID

static uint32_t SIM_HAL_GetDieId ( SIM_Type * base )

inlinestatic

This function gets the Kinetis Die ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns: id Kinetis Die ID

static uint32_t SIM_HAL_GetFlexnvmSize ( SIM_Type * base )

inlinestatic

This function gets the FlexNVM size in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns: size FlexNVM Size

static uint32_t SIM_HAL_GetProgramFlashSize ( SIM_Type * base )

inlinestatic

This function gets the program flash size in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns: size Program flash Size

static uint32_t SIM_HAL_GetEepromSize ( SIM_Type * base )

inlinestatic

This function gets the EEProm size in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns: size EEProm Size

static uint32_t SIM_HAL_GetFlexnvmPartition ( SIM_Type * base )

inlinestatic

This function gets the FlexNVM partition in the Flash Configuration Register1

Parameters

base	Base address for current SIM instance.

Returns: setting FlexNVM partition setting

static void SIM_HAL_SetFlashDoze	(	SIM_Type *	base,
		uint32_t	setting
	)

inlinestatic

This function sets the Flash Doze in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.
setting	Flash Doze setting

static uint32_t SIM_HAL_GetFlashDoze ( SIM_Type * base )

inlinestatic

This function gets the Flash Doze in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns: setting Flash Doze setting

static void SIM_HAL_SetFlashDisableCmd	(	SIM_Type *	base,
		bool	disable
	)

inlinestatic

This function sets the Flash disable setting in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.
disable	Flash disable setting

static bool SIM_HAL_GetFlashDisableCmd ( SIM_Type * base )

inlinestatic

This function gets the Flash disable setting in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns: setting Flash disable setting

static uint32_t SIM_HAL_GetFlashMaxAddrBlock0 ( SIM_Type * base )

inlinestatic

This function gets the Flash maximum block 0 in Flash Configuration Register 2.

Parameters

base	Base address for current SIM instance.

Returns: address Flash maximum block 0 address

static uint32_t SIM_HAL_GetFlashMaxAddrBlock1 ( SIM_Type * base )

inlinestatic

This function gets the Flash maximum block 1 in Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns: address Flash maximum block 0 address

static uint32_t SIM_HAL_GetProgramFlashCmd ( SIM_Type * base )

inlinestatic

This function gets the program flash maximum block 0 in Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns: status program flash status

static bool SIM_HAL_GetSwapProgramFlash ( SIM_Type * base )

inlinestatic

This function gets the Swap program flash flag in the Flash Configuration Register 2.

Parameters

base	Base address for current SIM instance.

Returns: status - Swap program flash flag(Active or Inactive)

Macros

Enumerations

Functions

Function Documentation