fsl_sim_hal_MKL17Z4.h File Reference

Macros
#define	FSL_SIM_SCGC_BIT(SCGCx, n)   (((SCGCx-1U)<<5U) + n)
	SIM SCGC bit index. More...

Enumerations
enum	clock_cop_src_kl17z4_t {   kClockCopSrcLpoClk,   kClockCopSrcMcgIrClk,   kClockCopSrcOsc0erClk,   kClockCopSrcBusClk }
	COP clock source selection. More...
enum	clock_er32k_src_kl17z4_t {   kClockEr32kSrcOsc0 = 0U,   kClockEr32kSrcRtc = 2U,   kClockEr32kSrcLpo = 3U }
	SIM external reference clock source select (OSC32KSEL). More...
enum	clock_osc32kout_sel_kl17z4_t {   kClockOsc32koutNone = 0U,   kClockOsc32koutPte0 = 1U,   kClockOsc32koutPte26 = 2U }
	SIM external reference clock output pin select (OSC32KOUT). More...
enum	clock_lpuart_src_kl17z4_t {   kClockLpuartSrcNone,   kClockLpuartSrcIrc48M,   kClockLpuartSrcOsc0erClk,   kClockLpuartSrcMcgIrClk }
	SIM LPUART clock source. More...
enum	clock_tpm_src_kl17z4_t {   kClockTpmSrcNone,   kClockTpmSrcIrc48M,   kClockTpmSrcOsc0erClk,   kClockTpmSrcMcgIrClk }
	SIM TPM clock source. More...
enum	clock_flexio_src_kl17z4_t {   kClockFlexioSrcNone,   kClockFlexioSrcIrc48M,   kClockFlexioSrcOsc0erClk,   kClockFlexioSrcMcgIrClk }
	FLEXIO clock source. More...
enum	clock_lptmr_src_kl17z4_t {   kClockLptmrSrcMcgIrClk,   kClockLptmrSrcLpoClk,   kClockLptmrSrcEr32kClk,   kClockLptmrSrcOsc0erClk }
	LPTMR clock source select. More...
enum	clock_clkout_src_kl17z4_t {   kClockClkoutSelFlashClk = 2U,   kClockClkoutSelLpoClk = 3U,   kClockClkoutSelMcgIrClk = 4U,   kClockClkoutSelOsc0erClk = 6U,   kClockClkoutSelIrc48M = 7U }
	SIM CLKOUT_SEL clock source select. More...
enum	clock_rtcout_src_kl17z4_t {   kClockRtcoutSrc1Hz,   kClockRtcoutSrcOsc0erClk }
	SIM RTCCLKOUTSEL clock source select. More...
enum	sim_adc_pretrg_sel_kl17z4_t {   kSimAdcPretrgselA,   kSimAdcPretrgselB }
	SIM ADCx pre-trigger select. More...
enum	sim_adc_trg_sel_kl17z4_t {   kSimAdcTrgselExt = 0U,   kSimAdcTrgSelComp0 = 1U,   kSimAdcTrgSelPit0 = 4U,   kSimAdcTrgSelPit1 = 5U,   kSimAdcTrgSelTpm0 = 8U,   kSimAdcTrgSelTpm1 = 9U,   kSimAdcTrgSelTpm2 = 10U,   kSimAdcTrgSelRtcAlarm = 12U,   kSimAdcTrgSelRtcSec = 13U,   kSimAdcTrgSelLptimer = 14U }
	SIM ADCx trigger select. More...
enum	sim_lpuart_rxsrc_kl17z4_t {   kSimLpuartRxsrcPin,   kSimLpuartRxsrcCmp0 }
	LPUART receive data source. More...
enum	sim_lpuart_txsrc_kl17z4_t {   kSimLpuartTxsrcPin,   kSimLpuartTxsrcTpm1,   kSimLpuartTxsrcTpm2 }
	LPUART transmit data source. More...
enum	clock_sai_src_kl17z4_t {   kClockSaiSrcSysClk = 0U,   kClockSaiSrcOsc0erClk = 1U,   kClockSaiSrcMcgIrClk = 2U,   kClockSaiSrcIrc48M = 3U }
	SAI clock source. More...
enum	sim_tpm_clk_sel_kl17z4_t {   kSimTpmClkSel0,   kSimTpmClkSel1 }
	SIM Timer/PWM external clock select. More...
enum	sim_tpm_ch_src_kl17z4_t {   kSimTpmChSrc0,   kSimTpmChSrc1,   kSimTpmChSrc2,   kSimTpmChSrc3 }
	SIM Timer/PWM x channel y input capture source select. More...
enum	sim_clock_gate_name_kl17z4_t {   kSimClockGateI2c0 = FSL_SIM_SCGC_BIT(4U, 6U),   kSimClockGateI2c1 = FSL_SIM_SCGC_BIT(4U, 7U),   kSimClockGateUart2 = FSL_SIM_SCGC_BIT(4U, 12U),   kSimClockGateCmp0 = FSL_SIM_SCGC_BIT(4U, 19U),   kSimClockGateVref0 = FSL_SIM_SCGC_BIT(4U, 20U),   kSimClockGateSpi0 = FSL_SIM_SCGC_BIT(4U, 22U),   kSimClockGateSpi1 = FSL_SIM_SCGC_BIT(4U, 23U),   kSimClockGateLptmr0 = FSL_SIM_SCGC_BIT(5U, 0U),   kSimClockGatePortA = FSL_SIM_SCGC_BIT(5U, 9U),   kSimClockGatePortB = FSL_SIM_SCGC_BIT(5U, 10U),   kSimClockGatePortC = FSL_SIM_SCGC_BIT(5U, 11U),   kSimClockGatePortD = FSL_SIM_SCGC_BIT(5U, 12U),   kSimClockGatePortE = FSL_SIM_SCGC_BIT(5U, 13U),   kSimClockGateLpuart0 = FSL_SIM_SCGC_BIT(5U, 20U),   kSimClockGateLpuart1 = FSL_SIM_SCGC_BIT(5U, 21U),   kSimClockGateFlexio0 = FSL_SIM_SCGC_BIT(5U, 31U),   kSimClockGateFtf0 = FSL_SIM_SCGC_BIT(6U, 0U),   kSimClockGateDmamux0 = FSL_SIM_SCGC_BIT(6U, 1U),   kSimClockGateSai0 = FSL_SIM_SCGC_BIT(6U, 15U),   kSimClockGatePit0 = FSL_SIM_SCGC_BIT(6U, 23U),   kSimClockGateTpm0 = FSL_SIM_SCGC_BIT(6U, 24U),   kSimClockGateTpm1 = FSL_SIM_SCGC_BIT(6U, 25U),   kSimClockGateTpm2 = FSL_SIM_SCGC_BIT(6U, 26U),   kSimClockGateAdc0 = FSL_SIM_SCGC_BIT(6U, 27U),   kSimClockGateRtc0 = FSL_SIM_SCGC_BIT(6U, 29U),   kSimClockGateDac0 = FSL_SIM_SCGC_BIT(6U, 31U),   kSimClockGateDma0 = FSL_SIM_SCGC_BIT(7U, 8U) }
	Clock gate name used for SIM_HAL_EnableClock/SIM_HAL_DisableClock. More...

Functions
static void	SIM_HAL_EnableClock (SIM_Type *base, sim_clock_gate_name_t name)
	Enable the clock for specific module. More...
static void	SIM_HAL_DisableClock (SIM_Type *base, sim_clock_gate_name_t name)
	Disable the clock for specific module. More...
static bool	SIM_HAL_GetGateCmd (SIM_Type *base, sim_clock_gate_name_t name)
	Get the the clock gate state for specific module. More...
static void	CLOCK_HAL_SetLpuartSrc (SIM_Type *base, uint32_t instance, clock_lpuart_src_t setting)
	Set LPUART clock source. More...
static clock_lpuart_src_t	CLOCK_HAL_GetLpuartSrc (SIM_Type *base, uint32_t instance)
	Get LPUART clock source. More...
static void	CLOCK_HAL_SetTpmSrc (SIM_Type *base, uint32_t instance, clock_tpm_src_t setting)
	Set the clock selection of TPM. More...
static clock_tpm_src_t	CLOCK_HAL_GetTpmSrc (SIM_Type *base, uint32_t instance)
	Get the clock selection of TPM. More...
static void	CLOCK_HAL_SetFlexioSrc (SIM_Type *base, uint32_t instance, clock_flexio_src_t setting)
	Select the clock source for FLEXIO. More...
static clock_flexio_src_t	CLOCK_HAL_GetFlexioSrc (SIM_Type *base, uint32_t instance)
	Get the clock source of FLEXIO. More...
static void	CLOCK_HAL_SetOsc32kOutSel (SIM_Type *base, clock_osc32kout_sel_t setting)
	Set the clock ERCLK32K output on selected pin. More...
static clock_osc32kout_sel_t	CLOCK_HAL_GetOsc32kOutSel (SIM_Type *base)
	Get output status of ERCLK32K. More...
static void	CLOCK_HAL_SetExternalRefClock32kSrc (SIM_Type *base, clock_er32k_src_t setting)
	Set the clock selection of ERCLK32K. More...
static clock_er32k_src_t	CLOCK_HAL_GetExternalRefClock32kSrc (SIM_Type *base)
	Get the clock selection of ERCLK32K. More...
static void	CLOCK_HAL_SetClkOutSel (SIM_Type *base, clock_clkout_src_t setting)
	Set CLKOUTSEL selection. More...
static clock_clkout_src_t	CLOCK_HAL_GetClkOutSel (SIM_Type *base)
	Get CLKOUTSEL selection. More...
static void	CLOCK_HAL_SetRtcClkOutSel (SIM_Type *base, clock_rtcout_src_t setting)
	Set RTCCLKOUTSEL selection. More...
static clock_rtcout_src_t	CLOCK_HAL_GetRtcClkOutSel (SIM_Type *base)
	Get RTCCLKOUTSEL selection. More...
static void	CLOCK_HAL_SetCopSrc (SIM_Type *base, clock_cop_src_t setting)
	Set the clock selection of COP. More...
static clock_cop_src_t	CLOCK_HAL_GetCopSrc (SIM_Type *base)
	Get the clock selection of COP. More...
static void	CLOCK_HAL_SetOutDiv1 (SIM_Type *base, uint8_t setting)
	Set OUTDIV1. More...
static uint8_t	CLOCK_HAL_GetOutDiv1 (SIM_Type *base)
	Get OUTDIV1. More...
static void	CLOCK_HAL_SetOutDiv4 (SIM_Type *base, uint8_t setting)
	Set OUTDIV4. More...
static uint8_t	CLOCK_HAL_GetOutDiv4 (SIM_Type *base)
	Get OUTDIV4. More...
static void	SIM_HAL_SetLpuartRxSrcMode (SIM_Type *base, uint32_t instance, sim_lpuart_rxsrc_t select)
	Sets the LPUARTx receive data source select setting. More...
static sim_lpuart_rxsrc_t	SIM_HAL_GetLpuartRxSrcMode (SIM_Type *base, uint32_t instance)
	Gets the LPUARTx receive data source select setting. More...
static void	SIM_HAL_SetLpuartTxSrcMode (SIM_Type *base, uint32_t instance, sim_lpuart_txsrc_t select)
	Sets the LPUARTx transmit data source select setting. More...
static sim_lpuart_rxsrc_t	SIM_HAL_GetLpuartTxSrcMode (SIM_Type *base, uint32_t instance)
	Gets the LPUARTx transmit data source select setting. More...
static void	SIM_HAL_SetLpuartOpenDrainCmd (SIM_Type *base, uint32_t instance, bool enable)
	Sets the LPUARTx Open Drain Enable setting. More...
static bool	SIM_HAL_GetLpuartOpenDrainCmd (SIM_Type *base, uint32_t instance)
	Gets the LPUARTx Open Drain Enable setting. More...
static void	SIM_HAL_SetUartOpenDrainCmd (SIM_Type *base, uint32_t instance, bool enable)
	Sets the UARTx Open Drain Enable setting. More...
static bool	SIM_HAL_GetUartOpenDrainCmd (SIM_Type *base, uint32_t instance)
	Gets the UARTx Open Drain Enable setting. More...
static void	SIM_HAL_SetTpmChSrcMode (SIM_Type *base, uint32_t instance, uint8_t channel, sim_tpm_ch_src_t select)
	Sets the Timer/PWM x channel y input capture source select setting. More...
static sim_tpm_ch_src_t	SIM_HAL_GetTpmChSrcMode (SIM_Type *base, uint32_t instance, uint8_t channel)
	Gets the Timer/PWM x channel y input capture source select setting. More...
static uint32_t	SIM_HAL_GetSubFamilyId (SIM_Type *base)
	Gets the Kinetis Sub-Family ID in the System Device ID register (SIM_SDID). More...
static uint32_t	SIM_HAL_GetSeriesId (SIM_Type *base)
	Gets the Kinetis SeriesID in the System Device ID register (SIM_SDID). More...
static uint32_t	SIM_HAL_GetFamId (SIM_Type *base)
	Gets the Kinetis Fam ID in System Device ID register (SIM_SDID). More...
static uint32_t	SIM_HAL_GetPinCntId (SIM_Type *base)
	Gets the Kinetis Pincount ID in System Device ID register (SIM_SDID). More...
static uint32_t	SIM_HAL_GetRevId (SIM_Type *base)
	Gets the Kinetis Revision ID in the System Device ID register (SIM_SDID). More...
static uint32_t	SIM_HAL_GetProgramFlashSize (SIM_Type *base)
	Gets the program flash size in the Flash Configuration Register 1 (SIM_FCFG). More...
static void	SIM_HAL_SetFlashDoze (SIM_Type *base, uint32_t setting)
	Sets the Flash Doze in the Flash Configuration Register 1 (SIM_FCFG). More...
static uint32_t	SIM_HAL_GetFlashDoze (SIM_Type *base)
	Gets the Flash Doze in the Flash Configuration Register 1 (SIM_FCFG). More...
static void	SIM_HAL_SetFlashDisableCmd (SIM_Type *base, bool disable)
	Sets the Flash disable setting. More...
static bool	SIM_HAL_GetFlashDisableCmd (SIM_Type *base)
	Gets the Flash disable setting. More...
static uint32_t	SIM_HAL_GetFlashMaxAddrBlock0 (SIM_Type *base)
	Gets the Flash maximum address block 0 in the Flash Configuration Register 1 (SIM_FCFG). More...
static uint32_t	SIM_HAL_GetFlashMaxAddrBlock1 (SIM_Type *base)
	Gets the Flash maximum address block 1 in Flash Configuration Register 2. More...
void	SIM_HAL_SetTpmExternalClkPinSelMode (SIM_Type *base, uint32_t instance, sim_tpm_clk_sel_t select)
	Sets the Timer/PWM x external clock pin select setting. More...
sim_tpm_clk_sel_t	SIM_HAL_GetTpmExternalClkPinSelMode (SIM_Type *base, uint32_t instance)
	Gets the Timer/PWM x external clock pin select setting. More...
IP related clock feature APIs
void	CLOCK_HAL_SetOutDiv (SIM_Type *base, uint8_t outdiv1, uint8_t outdiv2, uint8_t outdiv3, uint8_t outdiv4)
	Sets the clock out dividers setting. More...
void	CLOCK_HAL_GetOutDiv (SIM_Type *base, uint8_t *outdiv1, uint8_t *outdiv2, uint8_t *outdiv3, uint8_t *outdiv4)
	Gets the clock out dividers setting. More...
void	SIM_HAL_SetAdcAlternativeTriggerCmd (SIM_Type *base, uint32_t instance, bool enable)
	Sets the ADCx alternate trigger enable setting. More...
bool	SIM_HAL_GetAdcAlternativeTriggerCmd (SIM_Type *base, uint32_t instance)
	Gets the ADCx alternate trigger enable setting. More...
void	SIM_HAL_SetAdcPreTriggerMode (SIM_Type *base, uint32_t instance, sim_adc_pretrg_sel_t select)
	Sets the ADCx pre-trigger select setting. More...
sim_adc_pretrg_sel_t	SIM_HAL_GetAdcPreTriggerMode (SIM_Type *base, uint32_t instance)
	Gets the ADCx pre-trigger select setting. More...
void	SIM_HAL_SetAdcTriggerMode (SIM_Type *base, uint32_t instance, sim_adc_trg_sel_t select)
	Sets the ADCx trigger select setting. More...
sim_adc_trg_sel_t	SIM_HAL_GetAdcTriggerMode (SIM_Type *base, uint32_t instance)
	Gets the ADCx trigger select setting. More...
void	SIM_HAL_SetAdcTriggerModeOneStep (SIM_Type *base, uint32_t instance, bool altTrigEn, sim_adc_pretrg_sel_t preTrigSel, sim_adc_trg_sel_t trigSel)
	Sets the ADCx trigger select setting in one function. More...

Function Documentation

static void SIM_HAL_EnableClock ( SIM_Type *  base, sim_clock_gate_name_t  name  )

inlinestatic

This function enables the clock for specific module.

Parameters

base	Base address for current SIM instance.
name	Name of the module to enable.

static void SIM_HAL_DisableClock ( SIM_Type *  base, sim_clock_gate_name_t  name  )

inlinestatic

This function disables the clock for specific module.

Parameters

base	Base address for current SIM instance.
name	Name of the module to disable.

static bool SIM_HAL_GetGateCmd ( SIM_Type *  base, sim_clock_gate_name_t  name  )

inlinestatic

This function will get the clock gate state for specific module.

Parameters

base	Base address for current SIM instance.
name	Name of the module to get.

Returns

state true - ungated(Enabled), false - gated (Disabled)

static void CLOCK_HAL_SetTpmSrc ( SIM_Type *  base, uint32_t  instance, clock_tpm_src_t  setting  )

inlinestatic

This function sets the clock selection of TPM.

Parameters

base	Base address for current SIM instance.
instance	IP instance.
setting	The value to set.

static clock_tpm_src_t CLOCK_HAL_GetTpmSrc ( SIM_Type *  base, uint32_t  instance  )

inlinestatic

This function gets the clock selection of TPM.

Parameters

base	Base address for current SIM instance.
instance	IP instance.

Returns

Current selection.

static void CLOCK_HAL_SetFlexioSrc ( SIM_Type *  base, uint32_t  instance, clock_flexio_src_t  setting  )

inlinestatic

This function selects the clock source for FLEXIO.

Parameters

base	Base address for current SIM instance.
instance	IP instance.
setting	The value to set.

static clock_flexio_src_t CLOCK_HAL_GetFlexioSrc ( SIM_Type *  base, uint32_t  instance  )

inlinestatic

This function gets the clock source of FLEXIO.

Parameters

base	Base address for current SIM instance.
instance	IP instance.

Returns

Current selection.

static void CLOCK_HAL_SetOsc32kOutSel ( SIM_Type *  base, clock_osc32kout_sel_t  setting  )

inlinestatic

This function sets ERCLK32K output on selected pin.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_osc32kout_sel_t CLOCK_HAL_GetOsc32kOutSel ( SIM_Type *  base )

inlinestatic

This function gets the output status of ERCLK32K.

Parameters

base	Base address for current SIM instance.

Returns

Current selection.

static void CLOCK_HAL_SetExternalRefClock32kSrc ( SIM_Type *  base, clock_er32k_src_t  setting  )

inlinestatic

This function sets the clock selection of ERCLK32K.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_er32k_src_t CLOCK_HAL_GetExternalRefClock32kSrc ( SIM_Type *  base )

inlinestatic

This function gets the clock selection of ERCLK32K.

Parameters

base	Base address for current SIM instance.

Returns

Current selection.

static void CLOCK_HAL_SetClkOutSel ( SIM_Type *  base, clock_clkout_src_t  setting  )

inlinestatic

This function sets the selection of the clock to output on the CLKOUT pin.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_clkout_src_t CLOCK_HAL_GetClkOutSel ( SIM_Type *  base )

inlinestatic

This function gets the selection of the clock to output on the CLKOUT pin.

Parameters

base	Base address for current SIM instance.

Returns

Current selection.

static void CLOCK_HAL_SetRtcClkOutSel ( SIM_Type *  base, clock_rtcout_src_t  setting  )

inlinestatic

This function sets the selection of the clock to output on the RTC_CLKOUT pin.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_rtcout_src_t CLOCK_HAL_GetRtcClkOutSel ( SIM_Type *  base )

inlinestatic

This function gets the selection of the clock to output on the RTC_CLKOUT pin.

Parameters

base	Base address for current SIM instance.

Returns

Current selection.

static void CLOCK_HAL_SetCopSrc ( SIM_Type *  base, clock_cop_src_t  setting  )

inlinestatic

This function sets the clock selection of COP.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static clock_cop_src_t CLOCK_HAL_GetCopSrc ( SIM_Type *  base )

inlinestatic

This function gets the clock selection of COP.

Parameters

base	Base address for current SIM instance.

Returns

Current selection.

static void CLOCK_HAL_SetOutDiv1 ( SIM_Type *  base, uint8_t  setting  )

inlinestatic

This function sets divide value OUTDIV1.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static uint8_t CLOCK_HAL_GetOutDiv1 ( SIM_Type *  base )

inlinestatic

This function gets divide value OUTDIV1.

Parameters

base	Base address for current SIM instance.

Returns

Current divide value.

static void CLOCK_HAL_SetOutDiv4 ( SIM_Type *  base, uint8_t  setting  )

inlinestatic

This function sets divide value OUTDIV4.

Parameters

base	Base address for current SIM instance.
setting	The value to set.

static uint8_t CLOCK_HAL_GetOutDiv4 ( SIM_Type *  base )

inlinestatic

This function gets divide value OUTDIV4.

Parameters

base	Base address for current SIM instance.

Returns

Current divide value.

static void SIM_HAL_SetUartOpenDrainCmd ( SIM_Type *  base, uint32_t  instance, bool  enable  )

inlinestatic

This function enables/disables the UARTx Open Drain.

Parameters

base	Register base address of SIM.
instance	UART instance.
enable	Enable/disable UARTx Open Drain True: Enable UARTx Open Drain False: Disable UARTx Open Drain

static bool SIM_HAL_GetUartOpenDrainCmd ( SIM_Type *  base, uint32_t  instance  )

inlinestatic

This function gets the UARTx Open Drain Enable setting.

Parameters

base	Register base address of SIM.
instance	UART instance.

Returns

enabled True if UARTx Open Drain is enabled.

static uint32_t SIM_HAL_GetSubFamilyId ( SIM_Type *  base )

inlinestatic

This function gets the Kinetis Sub-Family ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns

id Kinetis Sub-Family ID

static uint32_t SIM_HAL_GetSeriesId ( SIM_Type *  base )

inlinestatic

This function gets the Kinetis Series ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns

id Kinetis Series ID

static uint32_t SIM_HAL_GetFamId ( SIM_Type *  base )

inlinestatic

This function gets the Kinetis Fam ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns

id Kinetis Fam ID

static uint32_t SIM_HAL_GetPinCntId ( SIM_Type *  base )

inlinestatic

This function gets the Kinetis Pincount ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns

id Kinetis Pincount ID

static uint32_t SIM_HAL_GetRevId ( SIM_Type *  base )

inlinestatic

This function gets the Kinetis Revision ID in System Device ID register.

Parameters

base	Base address for current SIM instance.

Returns

id Kinetis Revision ID

static uint32_t SIM_HAL_GetProgramFlashSize ( SIM_Type *  base )

inlinestatic

This function gets the program flash size in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns

size Program flash Size

static void SIM_HAL_SetFlashDoze ( SIM_Type *  base, uint32_t  setting  )

inlinestatic

This function sets the Flash Doze in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.
setting	Flash Doze setting

static uint32_t SIM_HAL_GetFlashDoze ( SIM_Type *  base )

inlinestatic

This function gets the Flash Doze in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns

setting Flash Doze setting

static void SIM_HAL_SetFlashDisableCmd ( SIM_Type *  base, bool  disable  )

inlinestatic

This function sets the Flash disable setting in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.
disable	Flash disable setting

static bool SIM_HAL_GetFlashDisableCmd ( SIM_Type *  base )

inlinestatic

This function gets the Flash disable setting in the Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns

setting Flash disable setting

static uint32_t SIM_HAL_GetFlashMaxAddrBlock0 ( SIM_Type *  base )

inlinestatic

This function gets the Flash maximum block 0 in Flash Configuration Register 2.

Parameters

base	Base address for current SIM instance.

Returns

address Flash maximum block 0 address

static uint32_t SIM_HAL_GetFlashMaxAddrBlock1 ( SIM_Type *  base )

inlinestatic

This function gets the Flash maximum block 1 in Flash Configuration Register 1.

Parameters

base	Base address for current SIM instance.

Returns

address Flash maximum block 0 address