Overview

The MCUXpresso SDK provides a Peripheral driver for the Power Management Controller (PMC) module of MCUXpresso SDK devices. The PMC module contains internal voltage regulator, power on reset, low-voltage detect system, and high-voltage detect system.

Data Structures
struct	pmc_low_volt_detect_config_t
	Low-voltage Detect Configuration Structure. More...

struct	pmc_low_volt_warning_config_t
	Low-voltage Warning Configuration Structure. More...

struct	pmc_bandgap_buffer_config_t
	Bandgap Buffer configuration. More...

Enumerations
enum	pmc_low_volt_detect_volt_select_t { kPMC_LowVoltDetectLowTrip = 0U, kPMC_LowVoltDetectHighTrip = 1U }
	Low-voltage Detect Voltage Select. More...

enum	pmc_low_volt_warning_volt_select_t { kPMC_LowVoltWarningLowTrip = 0U, kPMC_LowVoltWarningMid1Trip = 1U, kPMC_LowVoltWarningMid2Trip = 2U, kPMC_LowVoltWarningHighTrip = 3U }
	Low-voltage Warning Voltage Select. More...

Driver version
#define	FSL_PMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
	PMC driver version. More...

Power Management Controller Control APIs
void	PMC_ConfigureLowVoltDetect (PMC_Type base, const pmc_low_volt_detect_config_t config)
	Configures the low-voltage detect setting. More...

static bool	PMC_GetLowVoltDetectFlag (PMC_Type *base)
	Gets the Low-voltage Detect Flag status. More...

static void	PMC_ClearLowVoltDetectFlag (PMC_Type *base)
	Acknowledges clearing the Low-voltage Detect flag. More...

void	PMC_ConfigureLowVoltWarning (PMC_Type base, const pmc_low_volt_warning_config_t config)
	Configures the low-voltage warning setting. More...

static bool	PMC_GetLowVoltWarningFlag (PMC_Type *base)
	Gets the Low-voltage Warning Flag status. More...

static void	PMC_ClearLowVoltWarningFlag (PMC_Type *base)
	Acknowledges the Low-voltage Warning flag. More...

void	PMC_ConfigureBandgapBuffer (PMC_Type base, const pmc_bandgap_buffer_config_t config)
	Configures the PMC bandgap. More...

static bool	PMC_GetPeriphIOIsolationFlag (PMC_Type *base)
	Gets the acknowledge Peripherals and I/O pads isolation flag. More...

static void	PMC_ClearPeriphIOIsolationFlag (PMC_Type *base)
	Acknowledges the isolation flag to Peripherals and I/O pads. More...

static bool	PMC_IsRegulatorInRunRegulation (PMC_Type *base)
	Gets the regulator regulation status. More...

Data Structure Documentation

struct pmc_low_volt_detect_config_t

Data Fields
bool	enableInt
	Enable interrupt when Low-voltage detect.

bool	enableReset
	Enable system reset when Low-voltage detect.

pmc_low_volt_detect_volt_select_t	voltSelect
	Low-voltage detect trip point voltage selection.

struct pmc_low_volt_warning_config_t

Data Fields
bool	enableInt
	Enable interrupt when low-voltage warning.

pmc_low_volt_warning_volt_select_t	voltSelect
	Low-voltage warning trip point voltage selection.

struct pmc_bandgap_buffer_config_t

Data Fields
bool	enable
	Enable bandgap buffer. More...

bool	enableInLowPowerMode
	Enable bandgap buffer in low-power mode. More...

Field Documentation

bool pmc_bandgap_buffer_config_t::enable

bool pmc_bandgap_buffer_config_t::enableInLowPowerMode

Macro Definition Documentation

#define FSL_PMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))

Version 2.0.0.

Enumeration Type Documentation

enum pmc_low_volt_detect_volt_select_t

Enumerator
kPMC_LowVoltDetectLowTrip	Low-trip point selected (VLVD = VLVDL )
kPMC_LowVoltDetectHighTrip	High-trip point selected (VLVD = VLVDH )

enum pmc_low_volt_warning_volt_select_t

Enumerator
kPMC_LowVoltWarningLowTrip	Low-trip point selected (VLVW = VLVW1)
kPMC_LowVoltWarningMid1Trip	Mid 1 trip point selected (VLVW = VLVW2)
kPMC_LowVoltWarningMid2Trip	Mid 2 trip point selected (VLVW = VLVW3)
kPMC_LowVoltWarningHighTrip	High-trip point selected (VLVW = VLVW4)

Function Documentation

void PMC_ConfigureLowVoltDetect	(	PMC_Type *	base,
		const pmc_low_volt_detect_config_t *	config
	)

This function configures the low-voltage detect setting, including the trip point voltage setting, enables or disables the interrupt, enables or disables the system reset.

Parameters

base	PMC peripheral base address.
config	Low-voltage detect configuration structure.

static bool PMC_GetLowVoltDetectFlag ( PMC_Type * base )

inlinestatic

This function reads the current LVDF status. If it returns 1, a low-voltage event is detected.

Parameters

base	PMC peripheral base address.

Returns

Current low-voltage detect flag

true: Low-voltage detected
false: Low-voltage not detected

static void PMC_ClearLowVoltDetectFlag ( PMC_Type * base )

inlinestatic

This function acknowledges the low-voltage detection errors (write 1 to clear LVDF).

Parameters

base	PMC peripheral base address.

void PMC_ConfigureLowVoltWarning	(	PMC_Type *	base,
		const pmc_low_volt_warning_config_t *	config
	)

This function configures the low-voltage warning setting, including the trip point voltage setting and enabling or disabling the interrupt.

Parameters

base	PMC peripheral base address.
config	Low-voltage warning configuration structure.

static bool PMC_GetLowVoltWarningFlag ( PMC_Type * base )

inlinestatic

This function polls the current LVWF status. When 1 is returned, it indicates a low-voltage warning event. LVWF is set when V Supply transitions below the trip point or after reset and V Supply is already below the V LVW.

Parameters

base	PMC peripheral base address.

Returns

Current LVWF status

true: Low-voltage Warning Flag is set.
false: the Low-voltage Warning does not happen.

static void PMC_ClearLowVoltWarningFlag ( PMC_Type * base )

inlinestatic

This function acknowledges the low voltage warning errors (write 1 to clear LVWF).

Parameters

base	PMC peripheral base address.

void PMC_ConfigureBandgapBuffer	(	PMC_Type *	base,
		const pmc_bandgap_buffer_config_t *	config
	)

This function configures the PMC bandgap, including the drive select and behavior in low-power mode.

Parameters

base	PMC peripheral base address.
config	Pointer to the configuration structure

static bool PMC_GetPeriphIOIsolationFlag ( PMC_Type * base )

inlinestatic

This function reads the Acknowledge Isolation setting that indicates whether certain peripherals and the I/O pads are in a latched state as a result of having been in the VLLS mode.

Parameters

base	PMC peripheral base address.
base	Base address for current PMC instance.

Returns: ACK isolation 0 - Peripherals and I/O pads are in a normal run state. 1 - Certain peripherals and I/O pads are in an isolated and latched state.

static void PMC_ClearPeriphIOIsolationFlag ( PMC_Type * base )

inlinestatic

This function clears the ACK Isolation flag. Writing one to this setting when it is set releases the I/O pads and certain peripherals to their normal run mode state.

Parameters

base	PMC peripheral base address.

static bool PMC_IsRegulatorInRunRegulation ( PMC_Type * base )

inlinestatic

This function returns the regulator to run a regulation status. It provides the current status of the internal voltage regulator.

Parameters

base	PMC peripheral base address.
base	Base address for current PMC instance.

Returns: Regulation status 0 - Regulator is in a stop regulation or in transition to/from the regulation. 1 - Regulator is in a run regulation.

Overview

Data Structures

Enumerations

Driver version

Power Management Controller Control APIs

Data Structure Documentation

Data Fields

Data Fields

Data Fields

Field Documentation

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation